Polarkraft 195 has one of the biggest decks on any tin and that's why I went that way.
Type: Posts; User: gbruce
Polarkraft 195 has one of the biggest decks on any tin and that's why I went that way.
If they are not running much water the river can get pretty shallow fast.
That prop sounds small to me. I have the df200A on a 19' aluminum and I have a 14 1/2x25 that runs to 6000+ rpm.
My PolarKraft TX195 is 4 persons 700lbs
Revs should be 6000-6100 on that engine if I remember correct. I have the same prop as you if yours is 14.5" diameter and hit 6100 rpm with a DF200A. I have tried a 14.25" 27P 4 blade prop on my...
Hook a hose up to it and see if that allows anything to be flushed out.
No Ethanol for any small engine I own, especially my DF200A
Not sure what boat you are running but a friend of mine has a 19' aluminum bass with that engine and he is running a 14X23 3 blade Suzuki prop.
Jeremy there is a chase from the back of the boat to under the dash depending on what rigging there is on your boat. I ran a fish tape to under the dash and pulled a rope through. The area on the...
Bill do you have a hydraulic jack plate? I recently added one and haven't got to play with it much but I think it will make propping much easier. I have a 3 blade 14.5 25 pitch that I could turn to...
Congrats again on your purchase that is a good looking boat, I cheated as well.
There are a few Solas scorpions on ebay depending what pitch you are looking for
When I started looking for a boat I had the Renagade at the top of my list but when I put hands on one it was a different story. The quality that was supposed to be there was not even close to the...
Thanks guys for the good advice, I really didn't want to cut up my dash.
I have a 2018 DF200A and did read a few comments regarding NMEA connections, I may have to look at that more since I do have an NMEA network setup in my boat.
How hard is it to add a water pressure gauge to a Suzuki outboard? Putting a hydraulic jack plate on and read that a water pressure gauge is a must. Thanks for your help.
I have a Garelick 3 step on my boat but wish I would have gotten the 4 step. Garelick makes a solid product.
Price on 6" without and with gauge shipped to 65101. Thanks
Thanks for the info guys, just need to check my schedule and hope to be able to help with this.
Very interested in doing this, do you have to be there for all 3 days? Thanks
The first year they called the xb200 and updated the name this year. Not sure if they changed the hull when the name changed. They have one of the largest beams on aluminum bass boat.
I always run non ethanol fuel in my DF200A. I have tried the 4 blade prop you have and I could not turn it 6100rpm like the 3 blade 14.5 25 pitch prop that came with my boat.
Are all the ramps open on Mark Twain?
Billy Bob's Dairyland in Branson has excellent burgers.
Heading tomorrow night will report back on the crappie