Search:

Anyone had a problem with the brake adjustment not moving in or out? I noticed my brakes would not free up, I removed the side plate and noticed when turning the knob/dial the "brake pad" would not...

Will these aftermarket handles that are advertised as fitting abu reels really work? I notice on my current premier handle there is a washer inset/cutout for the nut to fasten to. The after market...

Anyone know where I can get just the anti reverse bearing for this reel? All I am able to find is the entire right side of the reel with the anti reverse installed already. The link shows which model...

Will this anti reverse bearing work in a revo inshore, I believe gen 1. Its a 2007 model with the silver body and blue spool. Looks like they only sell the side plate with the anti reverse and not...

I have a 3-bank charger so they will be charged individually.

Thanks for the clarification! Not to worried about the weight as I already have trolling motor batteries.

I am looking at new batteries for the boat. If I wire two batteries in parallel does that mean I can get by with a 800cca and a 750cca? The reason behind this is the strorge for my batteries will be...

Ok thanks guys. I will try and get most of it out and into my wife's suv just to be safe.

Got a new motor and the old fuel has been in my tank since June. The tank is full with mercury quick kleen mixed gas. Should I drain all 60 gallons or is it safe to run the 60 gallons thru the new...

Thanjs Don. I appreciate it. That's what I figured just wanted to see if there was any changes from year to year (or serial number to serial number)

I'm not to familiar with the difference in year models. Does Mercury do upgrades to these engines every year or are they all pretty much the same. Any major differences from a 2010 model vs a 2015...

Boy, you hit the nail on the head here. I'm still gun shy on what to do now, same idle as before. Dies when put into gear, or taken out of gear about 50% of the time or revs up when taken out of...

It would go into guardian mode at 1500 and go out of it at 3000 rpms

Don, No this is the only report. It was only done at this flow rate, I'm assuming that that's as high as his machine goes, I don't know. I have not checked my fuel line from motor to fuel tank. I got...

146126Here is the flow sheet from the air injectors. I am taking it in to a certified mechanic tomorrow. Over the weekend, the motor fired up fine at the ramp ran like a champ. When I fired it up...

Ok I will check all these items. Injector RX out of Houston TX did the injector cleaning after the fault code came on. Runs fine except for the when im sitting at the dock in neutral or first...

Fuel Injector Cleaning & Flow Testing Service - Injector Rx Here is the link to the company I used to clean my air injectors. I was getting a fault code for injector 4. I sent them all in the be...

I just read the rules for this forum. Sorry for my ignorance. 2010 Mercury 300xs serial number-1E003735 -Prop 24 pitch bravo 1 prop

1E003735 is my serial number.

I had an air injector problem a few months back and got them cleaned and flow tested. Runs better than ever, except at idle. When I start the 300xs in neutral and bump the throttle it dies. If the...