Search:

Some more ETEC techs > https://www.etecownersgroup.com/categories

https://www.bbcboards.net/showthread.php?t=1232663

I utilize the point1, that is used for my engine, on my console mounted Helix 15 g4 thru nmea.

Yes sir

What is the recommended psi? Should be on the trailer reg plate or sticker up front, near the 'V'.

I bought mine thru my dealer. They didn't require it to be installed by them. I made it removable on my rig.

It was complete, matched to driver's console and it was like $1100 otd.

547355

Finally got around to taking a pic of it.

I suggest posting here as well:

https://www.etecownersgroup.com/categories

Do you have a 12VDC light, or some sort of 12V load?
Could be switching with solid state and if using a digital VOM will show voltage as still present but not enough current to drive anything.

Goo-Gone gel to remove the glue. Soak it and let it sit awhile....scrapes right off easily.
...

Also, I replaced the circuit breaker and ditched the plug and hard wired it in.

I just used the existing #8 for my Ultrex,,,,no issues.

Around that time some of the plugs had issues with the pads coming off. New ones have an 'A' suffix now.

Possible option: https://www.bbcboards.net/showthread.php?t=1258050

I've got 1 or 2 hanging around somewhere, I think. Think they're TS's.

What boat model? Any pics?

What was the last one?

Ranger has both - I use both
Tracker just hand.

Not too hard at all. but the one thing is you have to change both, motor/shaft comes as one unit.

Yearly spray down of 'Liquid Rollers'....in and out with ease.

Sunday to Sunday

Be careful when deploying the motor. Look like the cables could get stuck in the steering motor mount and the aluminum mount, effectively slicing the wires.

I'll try and get a pic or 2 up soon. I...

With the 45" run the shaft down so about 1.5"-2" of shaft shows above locking collar.

I presume you have the Ultrex M360 mount as I do. If so, just come across the steering module from the cable...

Check for power at the power junction 'T'. Then check all 'T' connectors on the 2K network.

I would say its fiberglass encased over marine-ply. Approx 1" give or take total thickness.