Search:

2B533867

had to pull one stat today cause pinching the hose didn’t work. Had some wood. Question though running it in the hose and shooting the thermostat cover with thermo gun, the port runs...

It would rule out that nothing has changed with your voltage. Whether it be the cable or a connection.

Have you taken a volt meter and verified it at the plug?

23 3-blade fury is worked for bow lift is what you need.

Morning fellas.

When mine does that, it’s because the current track is full.

Sweet.

Absolutely!

Let’s say I have 6awg wire from battery to fuse block and the block is 4’ from the unit. Is it best to run the power wire straight to the fuse block or run a 10awg and shorten the power wire to let’s...

Mine went up 75%. Needless to say I went shopping and found a reputable company for way cheaper.

I've been using the Snail Trail for the last year. Works perfect and is extremely accurate compared to our club scale.

Yep. All reasons why I'm staying with 2.

Sweet rig.

I run an Ionic 125 cranking on my 250 ProXS 2banger. The only issue I have is on cold starts in the morning. It'll drag a little and if it's really cold, it struggled to start. I bought their jump...

Could be a host of things. Plugs, prop, pad of boat, water intrusion in boat, subtle weight in boat, restricted fuel, etc. are you turning the same rpm’s, less, more?

Mine was I had to switch from angler mode or custom mode. Then from the SI screen, hit menu, the sonar options, then SI sensitivity. This lets you adjust the left side to match the right. Then on the...

My hand works fine. The human skin can withstand 119deg. So if you touch one side and can’t leave your hand on it, that one is probably not the problem. If you can hold your hand, the stat is stuck...

Just a cheap plastic set from Amazon’s. It Yarlung locking pinching hose pliers.

I don’t stand in the middle of my 721. I stand in side the troller foot and in front the rod butts. You can’t do that with a 920 and have the room the 721 does. If you fish standing in the middle of...

Yep, agree.

Mercury 250 proXS 2B533867:
just passing some info on that may save your motor. My engine temp would only get to 80ish degrees. I knew I picked up some pebbles that was preventing one or both of...

No failure of equipment.

These are my voltage checks. Fully charged battery: 13.4, voltage at fuse block going to each unit: 13.2, voltage on console: 13.0, voltage at bow unit, 12.8. Don't know all of these at the end of...

How much voltage drop can one expect at the end of a normal day of fishing? Running a 125AH Ionic for motor and electronics. I have 1-10" solix and 1-15" solix, both Gen1. Humminbird and MinnKota...

If I'm gonna catch fish at this spot I'm going to.