Izorline Platinum for everything except frogging. It has never failed me.
Type: Posts; User: TonyL65
Izorline Platinum for everything except frogging. It has never failed me.
Ice fishing
I may look into that.
Thanks
Looks like a no. I was hoping to use the SHO prop as a spare.
Thanks Mark
I have a 2009 250 HPDI with a 25 T1 Vmax series prop. A friend has a SHO prop that also says 25 T1. Both are 15 1/8 diameter. Will the SHO prop work on the HPDI, are they the same prop?
Thanks
I finally got it. Thanks for the replies.
I have a Lews Speed Spool that I am attempting to replace the paw and worm gear on. I can’t get either side plate off. According to everything I see online the side plate should twist up and off when...
:thumb up2: Congratulations to Kyle on his TOC win. He was in my club here in New Bern before transferring back to California.
Thank you sir. Get to try it out this weekend.
I just purchased a used HDS7 Gen2 from the boards. My question is this, will the structure scan a sonar function properly with the LSS1 box and transducer? The seller, daleholler was great to deal...
Good luck
https://www.youtube.com/watch?v=Xor077ulk14
Try this if the link works, if not search HPDI problems on YouTube
There is what I would call a shift interrupter switch located at the front of the motor under the air diffuser that could cause similar problems. There are YouTube videos about the issue.
I had a similar problem with a 1995 Evinrude, it turned out to be the optical sensor. Not sure if yours has the same ignition system. Good luck with it.
Thanks for the replies and PM’s
Looking for a guide recommendation for Harris, Jordan and Falls. Preferably someone who guides on all 3 if possible.
Thanks for your help
Good job Antwan.
Results?
I just changed the reeds. You will need a manual to get the torque specs for reassembly. As others have mentioned it’s worth checking the low pressure pumps as well.
Do you have carbon fiber reeds? I had a similar problem, started fine when cold then got harder and harder to start after running. After changing both low pressure pumps, all spark plugs, and all...
You will need to replace the 2 crush gaskets that are on each injector. Total of 12. They are fairly pricey. Brucato has them in stock.
I did. They sent me a set at no charge. I have installed them and it runs well now. Still don’t know what caused the previous set to fail. There were 14 chipped or broken reeds in all. Some with half...
Delete. Pics did not post.
https://m.perrysmarine.com/
I plan to call them Monday morning. I’m not sure I want any more of those reeds even if they would replace them.