Hello, I've been chasing an issue I've had since last fall with my HPDI. It is bogging down when under load and killing at 1000-1500 rpm's. Idles fine in neutral, but as soon as you put in gear...
Type: Posts; User: BucketMouth1
Hello, I've been chasing an issue I've had since last fall with my HPDI. It is bogging down when under load and killing at 1000-1500 rpm's. Idles fine in neutral, but as soon as you put in gear...
Either of you guys resolve the issue? The tech I’m taking it back to thinks now it could be as simple as a throttle adjustment or possibly a bad coil
The primer bulb doesn’t seem to be full a lot of times and I have to go back and pump it every once in a while
Having a problem with my hpdi killing at idle then not starting after it kills until I wait a while then I can get it to start. It’s usually right when I dump it in, it pops off just fine..but unless...
Sounds good, thanks again
Thanks Wayne P. So since I do not have a shoot thru transducer I will NOT need a Y cable then correct? Also will I need two Ethernet adapters then or just 1? Thanks again
I am going to have a helix 7 SI g2n at the console and a helix 7 sonar/gps g2n up front. Wondering which cables I’ll need to link the units? My last setup I had a gen 1 helix 9 SI at console and...
Hey guys, looking for some help regarding my tilt trim on my 250 HPDI...first off, when I trim the motor up, it screeches pretty bad, but not so much when I go down. Second, ive had this problem...
Hey guys, looking for some help regarding my tilt trim on my 250 HPDI...first off, when I trim the motor up, it screeches pretty bad, but not so much when I go down. Second, ive had this problem...
Lost my oil cap after I filled my tank up with oil somehow, I have a 2007 250 HPDI with a 10.5 L oil tank...was wondering if someone could tell me where I can find one online? I don’t have the serial...
was fishing a tournament yesterday and trim the motor all the way UP while we were fishing for a couple hours....went to leave our spot and the tilt/trim was locked and couldnt tilt it up or down,...
I was talking to the owner of the shop I take my boat in for maintenance and repairs and he told me to use yamalube...for the guys that have used both still prefer the pennzoil? Just curious...
much cheaper than XD100 with my last boat! do these motors burn through fuel much faster or something?...crazy that theres that much price difference!
can u guys post the links to each of these? looks like there are a few different premium plus oils, thanks!
do you use both ringfree and startron at the same time ur saying? or just one or the other?
and also what kind of ethanol treatments are you guys puting in your fuel?
whats best oil to use for 2007 250 HPDI? thanks
But, if the boat has been used very minimally...it shouldn't matter a whole lot correct?
Hey guys, I’m looking at purchasing a 97’ 202 this weekend and this would be my first champion I’ve owned. I’ve read a few things about these older hulls and the transoms rotting? Was just curious...
Hey all, looking for a little help...likely going to be purchasing a boat with a 2007 250 HPDI this weekend and was wondering if this was a "series 2" HPDI? I am new to yamaha motors so dont know...
Am thinking of going with the 16oz as I heard it works better for older boats as far as closing compartment lids? Or is the 20 oz worth the extra $100?
Looking to put new carpet in my 2003 Triton TR-19. Was wondering what carpet you guys would recommend? I’m just looking for a solid carpet at an affordable price not necessarily a top of the line...
I've got a 2003 evinrude 200hp ficht and I've been having problems with my motor slow dropping after I raise it up and let it sit. It did this when I first bought the boat but hardly noticable...
Bassmeister, im running the 200 hp with a triton TR-19 (19.5 fter)...the 25 pitch puts out a litter better performance and puts my rpm in the right range for what the motor calls for so I'd like to...
Does it matter what brand of prop that should be on this motor? ran a 24p raker for the first year and seemed to work good but it got to beat up and I needed to go up a pitch to get the correct...