Search:

Thanks Gary

What is the difference between the plugs? QC12PEPB vs QC12PEP

What was involved in installing the deflector pins? Just curious.

Thanks,
BandSand

Hi Conlan,

I own a late 2005 (06") 60 HP E-Tec, on a 1600 Lund Explorer Tiller, I'm turning a 17"P SS Rapture @ 5900 RPM with myself in the boat. Top end is about 35 MPH.

Running XD-100 since...

Hello all,

Seasons Greetings!

I have a 05' 60 E-tec that will be due for it's first dealer visit this spring. I would like to know what my dealer should be performing at this 300 hour service...

Winnipeg, Manitoba, Canada http://www.bassboatcentral.com/smileys/smile.gif

Hi, I have a 05' 60 E-Tec tiller, after a long WOT run my does the same, a lot of smoke/fog coming from the exhaust outlet, after running for a period at idle in gear this goes away to minimum...

Thanks Johnrude. Bandsand.

Thanks again for the feedback. I store the boat full of fuel for winter storage, tank holds 15 US gallons, I treat with BRP fuel stabilizer as per the directions, typically by mid summer, I've...

Hi all, I've been reading a fair number of topics that owners have been receiving notices from BRP advising of updates for the EMM. Does this apply only to certain horsepower and model year?

I...

Hello everyone, Thank you for the feedback. It's good to know that this is not unique to my engine. I do not have the software revision, but I can share the following:

2005 60hp - E60DPLSD...

All, I have a 2005 60HP E-Tec tiller. She's running the most recent MAP as far as I know, had her in for a voluntary fuel filter replacement recall this past May. The dealer did a download of the...

Hi, I have a 05' 60hp E-Tec on a Lund 1600 Explorer Tiller. I experienced a similar problem with my engine as soon as I took delivery (July 05'). The engine hesitated and sounded like it was...

Hi All, I just had the new tiller kit installed this past week, tried it out this past weekend, it's great. My dealer installed the lasted MAP, all hesitation/stumble issues are gone. The fuel...

I've emailed this info to my dealer, I will be speaking with him shortly work on getting this resolved. Cheers! http://www.bassboatcentral.com/boardstuff2/beers.gif

Hey rudetech1, Did BRP put out a service bulletin regarding cooling issue with the 60's? Would most dealers be aware of this? Thanks for your feedback. Cheers!

Hey rudetech1, Will the new map eliminate or reduce the stumble? Is there a BRP P/N for the MAP. By the way, the engine is programmed for XD-100 only. Thx BandSand

Hi Robby, The plugs to the best of my knowledge have never been touched, straight from the factory so i'm assuming they are correct. Would plug indexing have any affect on mid range RPM's?

Thx...

Hi All, I posted last summer regarding my 2005 60 had what I called a stumble upon rapid acceleration from idle. I had the rig out for the first time this past weekend and the...

Hi All, How long has the new tiller been on the market and which P/N BRP has assigned to it? I purchased a 05' 60 E-tec, delivery of the tiller kit was the biggest issue for my dealer. If the new...

Hi All, Does BRP post any recall info at their siteor do they notify the customer directly? I have a 05' 60HP Tiller purchased in late summer. Just curious. Thx.

Hi Rusty, Here are the results of the prop tests. My dealer supplied a 13 3/4" x 15" P with the rig, at WOT with myself in the boat and trimmed to a safe level, the RPM's are 6000-6100. The...

Hi, This "Tin Boat" owner lives north of the 49th parallel! NW of Minneapolis in the Province of Manitoba. Were you paying attention in geograhpy class? Thx. ...

Hi All, Logged about 4 1/2 hours above 2000RPM this weekend, the stumble is still there, but not all the time. I only had myself and full load of fuel, 90% of the time, had my 2 1/2 year old son...

Hi Rusty, I received the DVD on the 19th via UPS. Thanks for your assistance. The DVD just reinfources why I bought Etec. Thx. http://xs-s.com/zf/images/smile/emthup.gif

After speaking with my dealer this afternoon, I'm going to use the camcorder to video the engine at various throttle positions, to try and capture the brief hesitation period I'm experiencing. My...

Hi Guys, I plan to put serious hours on the engine this weekend to get over the 10 hours above 2000RPM. I'll try the 17" prop as well. Cheers! http://www.bassboatcentral.com/smileys/smile.gif