Thanks for the info.
Type: Posts; User: PUMA1973
Thanks for the info.
I have a 2008 pro xs and am trying to run wires from battery to dash and need to move the shifter out to gain access to get wires thru. I have the lever off, now I see 6 bolts, 3 gold and 3 silver,...
Country Inn and Suites by Radisson has a gravel lot in the back that has outlets on poles. We have stayed there many times, but it has been a few years so you may want to double check the outlets are...
I should have made it more clear in my last reply. Lowrance had me install the latest patch again. Then we did all kinds of things, soft reste, turn one off then other back on, etc etc. Nothing...
An hour and 45 minutes on the phone with Lowrance yesterday and the guy decided I should probably replace my graph. Said nothing more he can do to help get the time to display.Made me a little pi**ed.
Not sure what you are referring to.
I have tried all I can think of. I have searched the forums with no luck.Driving me insane.
Here is the situation:
I have a carbon 12 at the dash and a HDS 12 Gen 2 touch on the bow. I can get the...
I agree with O2 sensor. Rent/borrow the removal tool from Oreilly, soak end of sensor in Yamaha fluid ( I think it is the ring free), reinstall. Had to do this about once a year with 250 OX66.
Also, unless they changed something in the last couple years, the 45" will mount right back on the 52" base. Simple hex bolt, 3 screws on the foot pedal, unplug and swap. I would use the 45" around...
I have been running Pumas for 12 years. One time I had a butt seat come out. Running 70 plus on St. Clair in 1-2 foot chop. Flew right between us and Post bottom tagged the cowling leaving me with a...
It has become a little tough. Like always, a couple teams found them, but overall not a real good weigh in.
http://www.bbtbass.com/htdocs/2018D&RGRANDRIVERRESULTS.pdf
Thank you.
Can anyone tell me what the thickness of the compartment lids are? I have access to some free Southco latches and know all the options of the latch that I need except "door thickness".
Thanks for the replies. I like the under the dash idea. I will give it a try.
I am installing a new Ultrex on my boat.
My question is, is there a right and/or a wrong way to stow the Ultrex? If I stow it with the prop towards the outside(port) then the head sticks out less...
Anyone with a puma or cougar that has installed an Ultrex, How and where did you mount the heading sensor?
PM Sent
Best Western woodhaven. Request a room on the north side, you can park boat right outside window and put cord out window. They are used to bass guys.
Only about 5 mins from launch.
Have him look into Austin or Paw Paw lake (Coloma). That is if he is looking to stick with a bigger lake. Those 2 blow away the 2 he has looked at as far as bass fishing goes. Austin has more full...
I have an '09 Puma with 250xs. Dual talons and 4 group 31 agms (70+ lbs each). I had to go with the Bravo1xs 26p for summer. With that prop she is a little sluggish when it is hot out and loaded down...
The championship is one that Watts actually did not win.:smile:
This is where the results have been posted.
Michigans #1 Bass Fishing Tournament Circuit
I agree with the fact that the locker does not open all the way (last 4" of travel or so). I can open the lid all the way buy just picking the trolling motor up about 2 inches. But, another tip, if...
The one that puked is the recirc pump. I think i will move one of my bilge (750) to the recirc pump and put the new cartridge (1000) in the bilge pump. Don't see the need for 1000 in the recirc,...
One of my pumps puked, it is a 750 gph mayfair. Can I put the 1000 gph cartridge in to replace, or is is physically not able to fit?
Yes they had it. Go to BBTBASS.com for the results.