Do you know the hours on the helix 10 di ?
Type: Posts; User: jdbarber
Do you know the hours on the helix 10 di ?
you can use the formula for tangent of a triangle to see where the center of you transducer is pointing. Use feet of water(tan(degree of angle) 25(tan(60°) = 43.3 ft from boat. After calculating...
I put a 150 pro xs 4 stroke on a 181 champion. Torque on hole shot is better than 2 stroke. Top speed 65 mph with a 24 fury. Pull the trigger on it you will be pleased.
I bought a sending unit that has 4 wires coming out of it. Marine dealer didn't have Two wire type. My original unit only had ground and tan wire. What do the other two wires go to? Computer to...
Thanks for your input. Did your engine cost $10500.00?
When the compression was higher on my 200 efi (2.5)it would run 75 GPS. The compression is near 100 now and it has lost 10 mph. To answer why I wouldn't just go with another 200, price and weight...
Ok I will be putting the motor on a 181 champion. It currently has a 200 efi that is getting tired. 150 is Max hp on the boat. I was asking about the 150 because I wanted to abide by the rating. But...
Thank you that let's me know I need a 175
Hole shot loaded to fish full livewells--- is it quick up on plane? also top speed light and top speed loaded with full Wells?
I'm thinking of repowering wondering how the new 150 pro Xs 4 stroke does. The 3.0 and 2.08 gear ratio will fix the hole shot it appears. But how is the top speed on a 18 ft boat?
I think I was the one that recommended the fury. I run mine at 3.75 prop to pad. It's on a 181 with 98 200 efi. Did the fury help your holeshot? If not take all the plastic plugs out. I would drop...
25 tempest has 3 of largest hole plugs.
24 fury has no plugs at all. I am spinning 6000 rpms. You may need to drop a pitch to get your rpms up. You are running 5700 with tempest.....i would try to...
I had the same problems you have with the tempest prop. I could run well by my self, no water in the wells and full gas. Add some water in the wells and a partner it was a dog out of the hole. I kept...
Ok thank you
I need to order an injector pump on 98 200 efi mercury serial number 0G740530. I also need necessary gaskets including the one around the vst where it separates.
I was unable to order off the...
Wish this could be explained more. How do you acomplish these steps?
Thank you
Motor serial #OG740530
1998 200 efi Mercury
I need the voltage for tps at idle position. I have been having bogging issues and the tps was loose so i am tring to set it to spec. Currently i have...
They are sierra brand
I bought new coils for a 1998 200 efi mercury and the new coils came with cylinders about an 3/4 of an inch long. What are these for? I did not see these when i removed my old coils from the plate...
When you idle make sure your exhaust port is not underwater. The small square one near the tell tale stream. Also when you rebuild your water pump be sure to silicon the wall between the pump and the...
98 Mercury 200 efi Serial # 0g740530 This motor uses premix fuel 16 oz oil to 6 gallon gas.This winter a new fuel pump in the vst tank was installed. new reeds installed. new plugs installed. it is...
Looks like I need new reeds. Motor is 98 200 efi serial # is 0G740530. I plan on sending the whole assembly to be cleaned and new reeds installed. I'd like to have TDR reeds or equivalent. Any...
I have a 98 200 efi mercury. Serial # is 0G740530. I need to order the electric pulse pump inside the vst tank and all the gaskets to reassemble. All of the dealers in my area are all to busy to...
Soooooo.......are you gonna post some pics of the 202 for sale?:confused2: