Search:

Looking at adding the nmea cable. Any input from people that had this installed? Were you able to snake the cable through the existing cable chase? Seems pretty tight for the nmea plug. Was...

I meant the ohm range to test with a DVM. x Ohms = 0 PSI, y Ohms = 45 PSI

Anyone know the make/model/pn?

Looks like a smaller padlock will fit the lynch pin hole on the bottom of my trailer pin. Will start using that...would suck to have it taken while out on the water.

My gauge isn't reading...anyone know what the ohm range should be? Or a part spec? Mine is behind the dash...you would think the safest spot would be in the bilge in case of a leak.

My thinking exactly which is why I want to see pics. I could maybe add some sort of eye bolt extension to the top inside bolt of the PP to bracket to guide the rope in between the PP and motor. ...

every console is removable.....at least once :roll:

I thought Ranger consoles were removable but they use adhesive that would make for a difficult re-install.

sorry to revive the thread...
I just picked up a used 2014 ETEC 250HO. Water pressure gauge doesn't move off "0". Under the cowl the water pressure transducer cable mentioned in link above is not...

no respect...good thing the ramp I normally go to is behind a locked fence (parking too).
...and that just keeps general public out.

Who the hell takes it off someone's trailer? Now I'm nervous...

Anyone successful with PP's? Pics of how the rope routed around the pp's?

Single all the way. If you frequently walk bow to stern it's WAY more accessible. Also if you sit and rig tackle having the extra room is key. I just got a 2014 Z520C and a dual wasn't even being...

Was looking at Flambeau. What are the best boxes to fit in the center part of the center storage compartment?

Thanks in advance.

that's what I figured...thanks for the confirmation.

So the pic on the instructions shows the tapered end with the cable towards the rear (facing prop). Assuming to add protection to the cable. Normal install without the adapter would be 180 degrees....

Any pictures from your transom installs? I'll be installing a 2d skimmer and LSS-2 later today. Thanks
184194

Interesting - do you have a structurescan (side) image from different angles?
If it was posted today I would have called BS.

Nice pics....Here's mine minutes ago...and yes I wrap my 28 year old boat.
168818

Are you still within the 2 year warranty? If not, you stated so if it was faulty from the start why wait until now to address it?

With that said (and I asked that in the nicest way)....
have...

You are correct. I did some research since my initial post. It's not the chemical itself that's the issue - it's the decomposition process. I talked to the manufacture of the chemical used and...

Thanks for your response. Actual experience is worth every word.

Does anyone have information on how fishing is in areas that are recently treated for milfoil? Chemical or otherwise? Wondering if bass avoid locations treated with 2,4-D ?
thanks

I'm sure he wasn't home...his dog would have been yipping at you.

nice and congrats - just saw the pics.

I'd like to thank Eddie Joe as well for a nice morning on the new rig. My Ranger is 25 years older and it's amazing at the difference. I think EJ fishes the docks just to get the people going!!! ...

How did you do? Any of those spots pan out?