He found it. Wire to console main power not snug. Thanks everyone.
Type: Posts; User: TBOGEYBOGEY
He found it. Wire to console main power not snug. Thanks everyone.
Just sold this boat. The guy that bought it cant get any power to the dash. I am guessing something is loose or unplugged. Any help?
I think Don was talking abot v6 and v8, the 150 is a four cylinder.
2021 150 pro xs Ser# 3B069972, is it safe to fog cylinders for winterization? Fuel is treated, oil and filter changed, lower unit lube done.
sounds good, thanks for the help.
Just picked up this boat and I am having a hard time running the transducer cable up to the dash, Does anyone have any help available ? Also, Where is a good place for the mega si transducer? I...
I have done about 10 boats including a 200xl and a 294, I agree with using an aerosol contact cement for the lids. It is much quicker, used weldwood or 3m. The floors and deck I would use contact...
clay bar.
I have run bass boats since 1998 and just switched to the Lund Adventure 1775 with a 90hp fourstroke Mercury. I new the switch would be different and there would be some things I needed to resolve...
I run a 2007 200xl with a 225 etec. It is set up 3.00" ptp and currently running a 26 trophy plus with the vent holes plugged. I am getting 5900-6000 rpm's and around 74.5 loaded. With the raker...
I have an 07 225 etec that does the exact same thing, new water pump kit maybe has 20 hours on it.
I have a 2007 stratos 200xl that looks as new. It is stored inside, waxed and cleaned often.
I dealt with this same issue last fall on a 2007 etec 225ho. It ended up being a voltage drop from battery to solenoid when cranked. I replaced the battery cables and was good. They were 120 bucks...
I have a 2007 200xl and removed mine, it took about an hour. In the rod locker pull the carpet down that faces the passenger console. There are four nuts for the four screws in the back of the...
The max rpm range is 5850 for your motor. 5" is way to deep.
I get more chine with the 3 blade vs. the 4 blade, that is why I switched. Also this thing likes the motor up high. I started out at 4" below the pad and it was tough to drive at the top and was a...
I have a 2007 200xl with a 225 etec. I can run a raker II 28 close t0 80mph but I choose to run a 4 blade trophy 26 for the ride and still get 74. The boat has tons of storage, like the weight in...
I have a 2007 200xl and the tubes came out with just a couple of screws. Lots more room. I use socks and can get 30 in there I bet.
I have a 26 trophy I want to run on this outboard, ( 2007 etec 225 e225dhlsug) on a stratos 200xl. I ordered merc hub kit 835265Q02 Flo-Torq II for Evinrude. There are splines showing when prop is...
I have done many boats and use a die grinder. There are many different types of pads to use and it is very effective. Just did a stratos 200xl.
I have done many boats and use a die grinder with a scotchbrite pad. I vacuum everything up and wipe everything down with something alcohol based so it evaporates.
I have a passenger console from a 2007 200xl.
thank you sir.
2007 e225dhlsua 225 ho, My key switch has a dead spot in it and I am looking for a replacement. I can't seem to find the part number in any of the drawings. The key switch has 6 posts on the back...
I run a 07 200xl with a 225 etec. I had trouble with my set up initially as my tach was way off. I installed nmea network and get live engine data. I run a 27 renegade at 5500 rpm for 74mph...