Search:

what pitch BRV 5 would be equal to a 26 BRAVO 1 XS and would this be a faster prop, are would the Powertech need to be worked to run better than the bravo

my 2012 z8 i had a 10" i put a 12" cmc hydralic and added bobs 2" spacers that really woke that boat up my 2020 z21 300 pro xs came with a12"atlas i added bobs 2" spacers on it these NITROS really...

u need a 23 fury your rpms r too low you need to be at 6100 maybe a 22 fury even

Mercury 24 pitch Bravo 1 Xs r Marks 24 Razor 4 XL and at least 12 inchs of setback

thanks im gonna order it

WHICH dexter kit do i need to order for my 2020 NITRO Z21 TANDEM TRAILER? trailer is sqeaking pretty good and i notice slack in
the sleeves of the shackles. where is the best place to order from...

thanks

posting for a friend some of these guys are running 26 pitch laser2 at up to 68 mph he is on the limiter with 22 i have a 23 tempest was gonna just try it what hub kit would i need to make it work i...

thi motor is mounted on a havoc 1756 aluminum boat with a 22 pitch laser 2 with square vent holes and pressed in hub i assume this is the older model prop as new lasers have pvs motor is turning 6200...

motor is on a 1756 aluminum flat bottom boat , prop is a 22 laser 2 6200 rpm at 60 mph will a 23 tempest fit this motor will hub kit work from the laser to the tempest are would it need a new hub kit

Tote Rite STR8 no need for steering locks been using this 3 yrs on my 2020 300 pro xs

thanks

these look like the same bolts that vibrated loose on my 2020 300 they attach powerhead to midsection get it looked at pronto midsection cowl has to be removed there are like 12-15 of these

To Mr Don my warranty expires 6/15/2023 serial # 2B691407 model 13000022A 300 pro xs. mercury sent me letter for platinum protection was interested in purchasing 3 years, mercury lists it at...

the. max 5 got better fe due to turning the least rpm

looks like they needed a 28 pitch bravo seems like it was on the limiter i think the bravo would have been faster

toterite STR8 been using mine 2 yrs on 300 Pro Xs works fine for me no need for steering clips

prop shaft broke at 30 hrs no impact,electic shift went out, blown water pump gasket sucks fuel is loud and lousy performance from this v8

i had the same bolt fall down from top of midsection to the space between lower unit and mid section lower portion of the cowl brought to dealer bolt came from the midsection plate that joins motor...

should be against the law to sell a boat without a jackplate

water pump gasket u probably overheat at idle than when u takeoff temp drops due to water pressure to motor mine did the same thing it was the water pump gasket that. blew out check that first

been fighting this problem on my 2020 z21 since new dealers changed out brake actuator it still does it have no idea why i just check brake fluid often

water pump gasket probably blew out know problem with these motor but also check the 2 water pump filters under the hood

add bobs 2 in spacers to ur jackplate and a 25 bravos 1 xs you will gain lift and speed and a set of trim extenders

26 Bravo 1 XS is what u want for the 2 stroke optimax Pro XS FS only has 4 vent holes