Had a similar issue, I assumed the wiring didn't have enough power to feed the Helix over the core unit I ran prior. I ran dedicated power feeds to all my units and used a relay connected to the...
Type: Posts; User: 76Champ
Had a similar issue, I assumed the wiring didn't have enough power to feed the Helix over the core unit I ran prior. I ran dedicated power feeds to all my units and used a relay connected to the...
Mozingo is a pretty hard hit tourney lake, not sure you'll get many direct and detailed responses here. Water clarity is all over the place, can go from average to chocolate milk. Plenty of shoreline...
Amazon.com: SCOSCHE PSM11007 TerraClamp MagicMount Pro Magnetic Universal Phone Mount : Everything Else
I used this last few seasons, the band works great when you are running. Got a new iPhone...
Every truck is different based on options, find the rating for your specific truck on the driver door jam.
Also run 26p fury, great prop for the 294. Pretty sure thats stock with Merc powered.
2ft longer than your current throttle cable was what I found from some posts on here. I can't read the length on my cable so I did some rough guessing and ordered a 15ft but I have yet to install it...
I use only 2 for my dual axel but I only use them to spin the boat about 2' to get it tucked against a pole as close as possible. You put them on the front axel and bring the tongue down as low as it...
I've used my harbor freight jacks for last 3 years with no issues. I'd say it's more related to quality of floor, weight of boat and how much you really need to maneuver it. With HF return policy I...
I use 2 to spin my dual axle boat when I want to tuck it as close as possible to my support pole, works really well. My garage floor is smooth.
Same, never figured out why I don't see others doing that also. Just like my childhood when you put them on the stringer and tossed them back in the pond and kept fishing.
Yep I was able to put a hole right next to the ram mount to feed both units through. I had some ABS plastic still left from another project I was able to use. Aluminum would be better but really want...
2006 294 is bit different with the stock 5" graph right in front, I put a plate in its place and mounted to top unit on ram mount and the bottom unit on over the pedal mount. So far its not in the...
I wouldn't take 3 big boys in my 294 any real distance or doing any serious fishing on a consistent basis. It's a skinny boat and made with a lot of thin and/or plastic components to keep weight down...
depends on if your current charger supports lithium batteries or not
google: "boat trailer tool box"
I've seen a few also and and went looking for one until I saw the prices. I'll just keep my travel tool box in the truck bed.
"Boards are untreated Southern yellow pine"
I use wheel chocks exactly where I want the boat to stop, gives me a target to backup at also and no chance for hitting the motor on anything
That's pretty cool didn't know vehicles had that as option. Agree feel like pressure and temp would be good info for all sensors!
Tire Pressure Monitoring System
Mike, not all TPMS systems are internal in the tire, you can buy some that go on valve stem that are not submersible.
Can you install and see those 4 extra sensors in your trucks computer/dash? If...
I think it really just depends on how bad it is. The bar of soap and dawn didn't work for me first time, but I don't think the bilge in my 06 had ever been cleaned once in its life. I had to simple...
6" was standard, search the boards and FB there are some guys who went bigger recently. You can't fix chine walk on a 294 that's how they are so fast comparatively speaking. Its a true driver's boat...
greatlakesskipper.com used to have some of them
my 2006 294 does not have a snap lock post. It uses a standard threaded post and is same front and back like Duck said. I'd keep spinning and pulling up at same time it should release
From Caliber website:
DISCLAIMER: BunkWrap is designed for raw aluminum boats, pontoons, and watercraft boat lifts. BunkWrap is not designed, or recommended, for gel-coat, fiberglass, or painted...