Search:

With cowl off and standing behind the boat, looking at motor, the wires going to the injectors are numbered as follows:

port - starboard

2 - 1

4 - 3

6 - 5

I should also note that I was watching the vessel view info on my phone and it was throwing the fault code when the RPMs would drop to 560 (it idles at 580 RPM) and it sounded like something missed...

I did some diagnostic work. Turns out that Fault 63 is injector #3, not injector #2. Just FYI.

When I removed the holding clip that holds the injector in place (with 2 allen head screws),...

The code did return, as you warned me :)

I've looked it all over very thoroughly and cannot find any wires that look to be rubbing against metal or any bare metal wires.

Next steps?

So, I purchased a boat that has 2x Interstate 27 series batteries (one is new, one was 2 years old) and 1x Everstart Maxx 29 series (1 year old) battery running the trolling motor.

The 2 year old...

Put new spark plugs in the boat and checked for loose wires or shorted wires. Didn't see any. Took the boat out for a test run, no alarms. The plugs fixed it or maybe I wiggled a loose wire or...

Hello all,

I have a 2008 Nitro 911CDC with 300xs. It is new to me. The shifter control does not feel safe. It is the same shifter control as in this picture.
...

2007 Mercury 300xs Serial #1E003401

I hooked up the VesselView Mobile to my boat today and got fault code 63. The app just tells me to contact my authorized mercury mechanic with no additional...

Took the boat out today. A constant alarm was going off as I was putting around at idle speed. If I gave the boat a little throttle, the alarm went off. Motor is a 2007 300XS.

Tonight I...

I've got just a few small bubbles in my carpet. it's no longer adhered to the deck in these areas. I was thinking that if there was some sort of injectable adhesive that worked with a syringe, I...

New to me boat/trailer...

2008 Nitro 911CDC on Nitro trailer.

I just noticed that only the left rear tire has a brake caliper. When I looked underneath, the hard metal brake line that goes...

I think I just solved my similar problem today. See this thread: http://www.bbcboards.net/showthread.php?t=791359

This was it, thanks! Love this board!

Now if I can hunt one down tomorrow locally, I will be all set.

Question for anybody that has replaced one of these reservoirs. I see 3 bolts, 1 harness...

2007 Mercury 300xs is beeping 4 times every 2 minutes. I've researched this board and have done the following:

- replaced water fuel separator filter

- cleaned remote oil reservoir, tightened...

Wow, you have that set up nicely then. I definately don't remember going that fast in my 2001 with 225 optimax.

Yup, on it's way to my house now. Been looking a long time for this boat in that condition.

Very excited to be taking delivery on a new (to me) 2008 Nitro 911CDC w/ Mercury 300xs on it in about a week. I owned a 911CDC with 225 on it several years ago and just going by memory thought I was...

Yes, at the very front edge, there is a PVC pipe running with wires through it. I actually cut through it a bit, but didn't hit any wires.

Thanks everybody. Unfortunately, didn't have the forethought to take pics before we got started. Would have been really nice to see them, too. Carpet was faded and ripped....lots of oxidation on...

Here are some more pics

I thought you guys might be able to appreciate all the sweat equity that went into this boat. It is a 1997 Champion 191 Elite. I decided to buy an older boat and fix it up with all the latest and...

I ordered it on ebay and with shipping came out to something like $77.

Thanks. That is the exact same one I am going to get.

I am wanting to buy a new steering wheel to update my 1997 Champion 191. Here is a picture of the steering wheel that is currently on it. You can see it is a keyed steering wheel. The new one I...

Looks great, guys. Thanks for the feedback. Would love to see pics of other Champion's with upgraded gauges.