Search:

It will require a 60 amp breaker

You should be able to.
The SHO will need the nmea2000 yamaha engine interface cable. That cable will then connect to a nmea2000 backbone network (you can buy the nmea2000 starter kit).
Then you...

I agree with these statements

As the battery runs down, it will not provide as many volts, thusly the motor won't be running as powerful. Have you noticed when the batteries are starting to die, your electronics are not...

Only issues are, it'll take more space when stowed(blocking view/in the way) and it sticking out a bit if you are in shallow water (getting in way of casting/flipping). They are not that bad for...

Both current units are G2N? and you want to add a helix 10 G1 to the console? the potentially new G1 unit will be able to leech the following frequencies from your current Helix 10 G2N; 455(SI DI),...

In addition to JMill's prong advice, any chance his wiring just so coincidentally is not giving power (loose connection or mice got at it) ? Use voltmeter or bring your unit head over to check? I...

That didn't take long and so many interested.

+4

I would think there is someone out there that wants the ultrex mount and gladly swap you their fortrex mount.

:thumb up2:

I have drained my cranking battery from the sonar and live well a couple times. One time I didn't have jumper cables and had to move my deep cycle to back to connect to the engine. Another time I...

Yup just via the ethernet cable + 1 AS EC QDE for the helix.

You are connecting them through the AS INTERLINK? The helix is not compatible with the interlink device. If you are, try connecting the helix directly to the 998.

There will be an obvious learning curve but I don't believe it is too difficult to adjust from Lowrance.

For me in Canada, I've stuck with the Navionics chip since LakeMaster Ontario is still in...

Left side is clear but the right side is not? Is the SI transducer mounted on the port side....? If it is, I am guessing that you're not trimming up the motor while trying to scan. The motor is...

"Declutter Waypoints"
1. Main Menu [Advanced User Mode]: Press the MENU key twice. Select NAV tab
2. Select Waypoint Decluttering.
3. Select ON or OFF.

On - If the waypoints are displayed close...

http://www.bbcboards.net/attachment.php?attachmentid=334322&stc=1
from the manual :...

What I found online -
GPS Connection Cable:
purchase the GPS Connection Cable in order to
connect a handheld or other NMEA* GPS-compatible device that you ...

Here's something to start with.
http://i238.photobucket.com/albums/ff167/WayneP_photos/CoreSettings_zpsjyh6whot.png

You don't have to install the heading sonar but that device will let you know what direction the bow is pointing. It allows you to plot waypoints from your 360 view onto your chart. The internal gps...

Here was one I found..

https://i.ytimg.com/vi/lSP6Jadrpq8/maxresdefault.jpg

One i found online..
http://www.bbcboards.net/attachment.php?attachmentid=334000&stc=1

http://www.bbcboards.net/attachment.php?attachmentid=333998&stc=1
http://www.bbcboards.net/attachment.php?attachmentid=333999&stc=1

A couple of DIY mounts I found online..
http://www.bbcboards.net/attachment.php?attachmentid=333996&stc=1
http://www.bbcboards.net/attachment.php?attachmentid=333997&stc=1