I currently run a 23P Tempest. Better lift with Tempest. Fury was 24P from factory and it still ran 62.
Type: Posts; User: agrigus
I currently run a 23P Tempest. Better lift with Tempest. Fury was 24P from factory and it still ran 62.
My 2016 Z18 will do 62 loaded two people
517518
Looks like corrosion from battery acid. Batteries are gassing when charging. Keep the fuse holders away from the battery caps.
Anybody been on Clinton lately??
Go to Lowe’s and pick up some 1/16 rubber washers. Perfect size spacer so when you put Velcro strap under mount it will sit tight.
It is tight but can be done. Have someone help with the screws. Remove the support for the bow cover will make it easier to reach in.
Any reports on Braidwood??
Ultrex 80/45 US2 non-link 60451
Ultrex 80/45 US2 non-link 60451
Cars are like trailers. Max PSI on my truck tires are 44PSI. Recommended pressure is 36PSI
If you ran 50Psi in your Marathons that would of given you 7480lbs
Running Endurance at 50PSI will also give you 7480lbs
It's amazing how many people don't have a clue on how much air they should put in trailer tires. Goodyear puts out a chart with recommended loads and tire pressure and some of you still think you...
My neighbor had a Ultrex with built in SI installed on his boat. First time out no SI. Called MinnKota and Humminbird and was told his GEN2 unit was a early build so SI will not work. Purchased a new...
If tires are over inflated can cause blowouts416929
IDNR boat stickers are available online. Just renewed mine. Recieved in about 2 weeks.License plate stickers also available online.
Hope this doesnt get any worse. I have a trip planned for Lake Fork First week of April and I plan on going
yes I had the same issue. used a heat gun and took a little bend out of bracket so it doesn't hit the sender.
Call TH-Marine they will send you one.
You will have to remove the tie down loops. Removed mine filled holes, glassed the inside of hull and gelcoated exterior.
https://www.land-craft.com Not close but do very good work.
21'3" with tongue folded. Specs are on the web-site under Specs and Highlights
Purchased my Z18 without a jack plate. Installed a Atlas 8" over the winter. Prior to jack plate would run @ 63 GPS at 5400RPM and would start to chine walk. With jack plate less chine walk and...
I've learned through the years to always do test areas using different compound's and pads and see what will give the best results. Fg400 works great on lighter colors but darker colors will leave a...
http://www.bbcboards.net/attachment.php?attachmentid=318573&stc=1http://www.bbcboards.net/attachment.php?attachmentid=318574&stc=1This is the side of my Nitro. I used Menzerna FG 400, rotary polisher...