Search:

The compartments arent dry storage. they didnt miss 10-15 spots with the deck weld. look at any other Xpress boat and it will be the same. Silicone the areas between the welds and the ends of the...

The Ti has nema 2k capabilities, if i remember right, if so you can get the sonic hub and eliminate the need for a head unit

Maybe try a 17p trophy or work yours down to 18p but a GOOD prop guy. you should be able to spin the shit out of that with the plugs removed and if you are turning the 19 6100 rpms then you should...

i hand an onboard charge in there also. it was on the left side and i had an amp on the right.

As for your holeshot, i dont remember if you have a f115 or the sho 115. If its the f115 then yes...

I had the jbl Speedo radio with an amp in the console and speakers on the console. The jbl radio is amped but not enough espically with only 2 speakers. To really hear while running 40mph it needed a...

Timjr - for holeshot pull the plugs out the prop barrel. I had the solid plugs and drilled holes bigger and bigger until I had the holeshot I wanted

Props - trophy is a 4 blade only. It ran fine on my 115 and many other are using it. Typically when going from a 3 to 4 blade you lose rpms so drop a pitch but I was slinging a 19 pitch trophy with...

Unless you are restricted to a budget please don't start the powertec swap game. it won't get you the results you want. Go back through the 22 pages and any other thread and see how many people found...

With the sho can stay at 6200-6300 max. The 6000 is for the regular Yamaha. Your speed didn't increase because the prop is slipping still. Turning a new prop that grips will be like a brand new boat...

In a nut shell, the bay series isnt a true bay boat. Its a bass boat hull with a center console. In south LA it is best kept to the calm waters of the marsh and bayous. I needed a boat that could...

At rest my h20 would float in 15". I could get pretty shallow when trolling.

ive run over striaght mud in my xpress at 30mph haha 1.2-1.5' (from transducer) was the lowest i could get on plane with jp raised and 4 blade prop. float in 1'

Satellite imagery maps. I sent you a PM

I mainly ran the 4 blade trophy I also ran a 3 blade pro series.

It doesn't matter what hole you mount the motor to the jackplate as long as you can get it to the heights needed. The115 sho on...

i took out the charcoal canister and i could use a 2" line to fill the boat if i wanted. just got to watch out because it will overflow without it

Check your email

boats classified as longer than 20' dont need a yellow coast guard sticker. HP goes off of what the transom can hold. my 22' (21' 4") bay boat doesnt have a yellow sticker.

I put an 82lb motor guide great white. Just used what holes I could and made new ones where needed.
New boat I replaced a great white with an Xi5 and used a quick release bracket using what holes I...

That sound right. You need a 17 stiletto to get to 6000 meaning you turn a "slower" prop faster so you still get 45mph. That was my problem, I could turn a 21 pro series fast when light but not with...

I would run between 43-45mph. Every time I went out I had a full gas tank, same gear, and 2 people. Heavy I'd have 4 people and a packed 65qt drink chest and fish chest.

Wes, that's some good...

is the motor is a 2012 then you have the "old" motor. I think the gear ratios stayed the same with the new design. i cant find anything online saying it changed.

47+...is this with new the I4 115? Using the new I4 gear ratio your numbers give a 5% prop slip. Thats amazing numbers. Try running with 30 gal, 2 ice chest, gear and a second person and let me know...

Yeah the prop is slipping. That's why you aren't getting a speed increase.
As far as the diameter increase I always treated it like going up in pitch. That also depends on blade design for how much...

sorry man dont have it anymore

if i remember right i used a SOLAS hub kit from a Fast Eddies here in Houma. You can call mercury can get the part number or search on this forum, ive see nit posted a bunch