The inner seal the spring should face the inside of the gearcase. The outer seal the spring faces the prop
Type: Posts; User: Matt Wayne
The inner seal the spring should face the inside of the gearcase. The outer seal the spring faces the prop
Very possible it’s oil that leaked out if the front half when they pulled the reed plate to replace the reeds. Also check the oil lines going to the front half and make sure one didn’t get knocked...
3m 4200 is what I would use. I definitely wouldn't use 5200
Loctite also makes a good marine adhesive/sealant. It's allot like the 4200 and can be bought at Lowes
Thanks for the video. That seems much quieter than the pro xs.
I have a 300R on my bass boat so I know what they sound like at idle. I have also driven several of the 250 pro xs v8s and they sound the same at idle. I’ve seen the videos on YouTube where you...
Nothing really negative with 5 degree as long as you have enough trim.
I would do black panels since your console is white. The white panels bullet sells are nice but they are a brighter white than the white gel on your boat. So it will make your white gel look a...
I see this allot when changing the water pumps on any of the 3.0 lower units. I usually take a little bit of silicon and dab the gasket before putting a new one in. Not much, I just put a little...
Beautiful boat. Congrats!
According to the SN you have a 3.0
There is a fuse panel under the dash
I’ve had several mounted both ways and I prefer the TN style. It looks better to me and it’s easier to stow and deploy.
I can see however it could be a problem if using a set down seat on the...
I just hung one on pretty much the same boat with the same setback but I've not got enough time on mine to be much help. I plan on doing some testing here really soon. I just got past the 2 hour...
Yes very glad to have it back.
Thanks
I'm glad this got bumped back up. I'm thinking of doing the exact same thing Ted. Yours look great I may be giving you a ring in the near future.
Trying something a little different on the black boat :cool:
431864
The 27 bravo xs is a great fishing prop on that combo. I’m speaking from experience.
The 26 promax will be a little faster and does really good everywhere but hole shot. It’s a little tricky to...
No sir it should hook up just like the xr6
Gary, something I do when starting one after a rebuild is hook a fuel pressure gauge up so I can monitor fuel pressure. I then pump the primer bulb up tight, turn the key on and let the fuel pump...
2011
Cleaned the road trip off of it today. Lol
423633
423634
423635
Gary removed the motor shortly after I sold him the boat and put it in his liberator. He had a nice 300xs on this one but he kept it.
If you're deleting the oil injection you might as well remove the water in fuel module as well because it will be useless when you remove the oil alarm module. If keeping the oil injection it...
Took a while but I finally brought it back to NC where it belongs. Lol
423548
That is definitely a 2.5 in the picture.