Search:

Type: Posts; User: ChampioNman

Page 1 of 20 1 2 3 4

Search: Search took 0.38 seconds.

  1. Check this adjustment,...

    Check this adjustment, http://www.bbcboards.net/showthread.php?t=11790 and then give your idle jets one full turn counter clockwise.
  2. The things you see when you don't have a gun!!

    Looks like old Bassmeister caught up with the Gearcase man! Please don't open around children they'll be scarred for life! :laugh:


    Bassmeister is on the right with his Sprint boat hat on.
    ...
  3. Replies
    2
    Views
    38

    Hey Steve, Go by the hardware store and get...

    Hey Steve,
    Go by the hardware store and get you 3 3.5" long 5/16" 24Pitch (fine thread) 9 good size fender washers. You're gonna need a socket for the flywheel nut. You may also want to pick up a...
  4. Replies
    6
    Views
    88

    They are mounted back to back on the bracket so...

    They are mounted back to back on the bracket so only one pulse line is needed. There are indeed two pumps on that bracket.
  5. so your problems have been resolved?

    so your problems have been resolved?
  6. Replies
    10
    Views
    150

    Motor is designed to run on 87 octane with up to...

    Motor is designed to run on 87 octane with up to 10% ethanol.
  7. Replies
    11
    Views
    160

    Fred must be wrong he's probably done about 3 or...

    Fred must be wrong he's probably done about 3 or 4 60 degree motor water pumps. What do the FB mechanic say?
  8. Replies
    11
    Views
    160

    Told him that in the first post I made up. :laugh:

    Told him that in the first post I made up. :laugh:
  9. Check the spring on the throttle handle to...

    Check the spring on the throttle handle to release the neutral lockout lever (red handle) may have slipped out. What type control box do you have the concealed side mount or the surface mount?
  10. Replies
    6
    Views
    88

    I'm a mechanic and use these all the time when...

    I'm a mechanic and use these all the time when the customer doesn't want the VRO any longer and doesn't want to spend the coin on the Evinrude non oiling fuel pump. They work just fine.
  11. Replies
    6
    Views
    88

    https://maxrules.com/fixomc-no-oil-vro.php you...

    https://maxrules.com/fixomc-no-oil-vro.php you need #06-200
  12. Replies
    5
    Views
    150

    :laugh:

    :laugh:
  13. Anchor barrel on cable in the box is more than...

    Anchor barrel on cable in the box is more than likely broken allowing the cable to slip back and forth.
  14. Wouldn't be the first time a screw with a...

    Wouldn't be the first time a screw with a different length was used. The screw attaches to the lower belly pan the elongated side of the grommet extends outside the motor.
  15. No it does not attach to the sleeve, the sleeve...

    No it does not attach to the sleeve, the sleeve is simply a tube to stiffen the grommet. The screw passes thru.
  16. Replies
    23
    Views
    1,092

    Mrs. Chapo

    Mrs. Chapo
  17. Welcome!

    Welcome!
  18. Replies
    4
    Views
    109

    So you didn't use OEM fuel lines?

    So you didn't use OEM fuel lines?
  19. Replies
    12
    Views
    330

    Do yourself a favor and get rid of those screw...

    Do yourself a favor and get rid of those screw clamps and get either the snap clamps, wire clamps or BRP Zip Ties.
  20. Have you tried cleaning the relay socket with...

    Have you tried cleaning the relay socket with contact cleaner?
  21. Here is a how to from the stickies...

    Here is a how to from the stickies http://bassboatcentral.com/johnrudetips.htm I use Permatex Aviation adhesive/sealant from any auto parts store. The kit will come with a small packet of molylube...
  22. Replies
    15
    Views
    307

    It could be coming from leaky float bowls, the...

    It could be coming from leaky float bowls, the nut on the fuel filter, any of the hoses a cracked maintenance valve or cap on the primer solenoid. Need to prime the system with the air box cover off.
  23. Replies
    11
    Views
    160

    I've told you twice you pull the hitch pin and...

    I've told you twice you pull the hitch pin and push the rod to the left it will free the shift rod pin. You don't unbolt anything. Do you think I make this stuff up??
  24. Replies
    12
    Views
    330

    Yes it did.

    Yes it did.
  25. Replies
    2
    Views
    44

    DI

    DI
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4