Thanks for the input guys. I decided to go a different direction anyway but was intrigued with mercury offering the dressed powerheads. Just waiting on the 250R to come in now!
Type: Posts; User: rstanley
Thanks for the input guys. I decided to go a different direction anyway but was intrigued with mercury offering the dressed powerheads. Just waiting on the 250R to come in now!
Pretty sure the 625’s were ahead of the SS which was ahead of the XRS.
What is needed to do a complete swap from a 250xs to a 300xs? I’m guessing adapter plate, but any help would be appreciated.
thanks Robbie
It's different for sure. Red gel, purple flake with black bottom. Its quick too!
Buddy of mine 20cc...
Thanks for your insight guys, It really helped me out.
Thanks,
Just bought a 20xdc and had to pull the tank to replace pumps in the bilge. I was considering putting my skimmer in the bilge with epoxy while tank was out to keep from drilling holes and mounting on...
He thinks it overheated. They plugged it up on the computer and everything checked out.
Yes that's who has it. Would all 3 injectors go out at the same time?
Thanks for all the replys...They opened it up today and found 3 gaulded pistons on the port side but block isn't hurt,starboard side looks good. Going to hone all 6 holes re-ring starboard side and...
2006 250xs with 260 hrs has compression ranging from 90 to 75 and excessive oil blow by in intake. Would honing and re-ringing be an option or new powerhead? Seems like all cylinders are weak. 90 is...
Ok thanks,
Does anyone here know how I can get in touch with a fastbass board administrator to figure out how to reset my account or find out why it is even locked?
Thanks,
Top notch people...ive owned 2 blazers, neither of which was new and they have gone out of their way to help on anything I needed. When I do buy a new one there's no doubt who I will call.
I run a bravo on my 202/250xs, handles like a dream but 79.1 is best I've got on top end. More like 77 to 78 most times but if you not trying to race it is a good all around prop.
:thumb up2:
Looks good!
Sorry guys I've been busy and haven't been on here. Pm or txt me and I would be happy to help in any way I can. If nothing else I can explain exactly the way I done it. It's really not that much to...
Thanks guys,
Can anyone tell me who makes those spacers to raise foot petal up out of recessed pan about 1 1/2 or so?
:thumb up2:
Thank you, no extras but it wasn't that hard to just took a couple hrs.
TJ the red looks good on there!:thumb up2:
I also used the 3m di-noc on the strip between upper and lower cowl of motor. It turned out really well also.
158279