Oh my gosh! I didn't thing any of these still survived!!!
Type: Posts; User: Tiger Basser
Oh my gosh! I didn't thing any of these still survived!!!
http://www.bbcboards.net/attachment.php?attachmentid=340446&stc=1
EAST ALABAMA TACKLE CENTRAL..... couple other small things out of frame like colorant, plastisol and bait storage
But it didn't start off well.. It's SURPRISING how brittle 25 yr old plexiglass can be..:mad: http://www.bbcboards.net/attachment.php?attachmentid=323397&stc=1
But it turned out...
I'm kinda CHEAP, but also BASICALLY LAZY... I bought a PACK OF THESE for my sleeves then wrote on the tabs as needed with a sharpie......
This one is from Ultramolds...Twitchy in 4.75" You can get multi cavity, but they won't do laminates because of cavity orientation. https://www.eatackle.com/product-page/4-75-twitchin-minner
AFTER I FINALLY FOUND THEM back there,when I recarpeted mine, I used Stainless Finishing Washers when I reinstalled the panel....NOW at least I KNOW where the screws are when I have to remove the...
Been buying fro CLEARBAGS for about a year now and I don't think you have been steered wrong. They have so far been great...
I WILL NOT start a pouring session without one....
IF you can get DEL to ship his to you and you do a LOT of pouring...A small suggestion......Lose the studs and knurled nuts he uses to clamp two sides of each mold together.... I have 10 of the mold...
That hinged version is currently available at ULTRAMOLDS.COM. You might be able to get the measurement of the BODY thru them at support@ultramolds.com the TOTAL length IS 1.75 Inches.
GO to bigdawgbaits.com. He uses that mold and has them at retail, but at least you can get some....
I'm guessing you already checked the forums for used stir motors. They do come up occasionally.... That being said, you CAN build one yourself, but I tried it and failed miseably since I am not...
Moved this from my other post, since it is on this same subject.
My rig is a 1993 295 Pro with a carbed 175HP Johnson Fast Strike behind a 6" Rite Hite Manual Jackplate set at 3 1/2 inches. The...
I've read a lot that says you should power up to the MAX rating of the hull, so I have always wondered if the 175 was enough to push it efficiently. Just dunno if I should repower a 22 yr old boat.
Thanks rchavis.....you might have a point. I have one of these props which was originally on the boat when I became second owner. Got another one from a buddy when he took it off of his 225 HP...
Thanks, guys. I recently had some work done, but it was mostly ignition work.....trigger, plugs, power pack and what not. Dunno if they did any work on the fuel system other than a new filter. Maybe...
My rig is a 1993 295 Pro with a carbed 175HP Johnson Fast Strike behind a 6" Rite Hite Manual Jackplate set at 3 1/2 inches. The prop is an original RAKER 14 1/2 x 24. I don't think this prop is...
So, After reading down in this thread, I have to ask about my situation. I own TWO Gen2 HDS-8 units with the LSS-2 transducer option mounted on the stern of the boat, along with an 83/200. BOTH head...
If Mark is referring to BTSMOLDS.COM......Bob Jones Arizona company, I am gonna have to say DITTOS..... I ordered six nolds from his site just over a week ago and they arrived in the mail today.......
Not MIA, but he sure takes his time answering emails. I got a couple responses, but I guess since i didn't pull the trigger right away he figgered I was a lurker and hasn't kept up with the back &...
Mine has morphed over the last couiple years, but here's some pics ......Man_Cave_ Etc Photos by Tiger_Basser | Photobucket
Tony,
An old Microwave, and a pyrex or anchor glass measuring cup is all you need to melt the old worms. DO NOT use your wife's stuff or you gonna get in LOTS of trouble. Then of course you need...
Calhouns will hard pack if it sits, which this batch obviously did... It can be resurrected, just as you have done. My 5 gallon bucket had the same problem when I let it sit for several...
Don,
I'll call you on the lot sometime before the weekend.........
Yeah, but if he's gonna travel that far, he might as well stop by C&O and buy a trailer from them..........