I have heard you lose the image quality with the 62? It also looked like some were using the 62 in perspective?
It will be interesting to see what the next version can do. It seems like its about...
Type: Posts; User: jjbz21
I have heard you lose the image quality with the 62? It also looked like some were using the 62 in perspective?
It will be interesting to see what the next version can do. It seems like its about...
Been thinking of upgrading my lvs32 to a 34 but if something is expected this year or next I want to wait?
Also, I saw on Chris Zaldains YouTube that quite a few pros are using the saltwater...
I use the plano edge crankbait box. Its not perfect but it keeps the baits in good shape.
...
Too many crossmembers to deal with. That would have been a real pain :)
I was planning to use all wood too but the bees living in and around them changed my plan :)
I had an older one M977 that i put a new engine and sold. Then I found this one in PA at a surplus dealer. It was a military rebuild and had less than 100miles on it.
I thought about that but if you run into any issues you are stuck. In my case I used an impact to remove some of the bolts and that caused some galling with the stainless fasteners. I had to make a...
It took a few tries to get it lined up. I did it by myself and was able to roll the trailer around with no problem. Bumping the supports wasn't an issue with the crane. The supports were only there...
This happened last weekend. I replaced the bunks with Gatorbaks and some other maintenance that was easier with the boat off the trailer.
Anyone else ever do this? Its a little stressful at first...
I get the same. How does the coke help?
I have had slurred speech with mine a few times as well.
I always make sure I have advil with me wherever I go. I usually take 3 then it takes about 30...
I just did an 8lb rack in a drum smoker at 225-250. Put them on last night at 930. They stalled at 163 for hours so after 10 hours I wrapped them in butcher paper with some A5 wagyu tallow and put...
Are you sure nothing is stuck in them? Gravel, Grass etc? It doesn't take much. The first trip I took in the spring was to a lake with a gravel/dirt ramp and the water was low. After the first run...
Are you sure the thermostats are OEM? I had a similar issue and found that the aftermarket thermostats I purchased were letting enough water by to keep it from getting up to operating temp. Went to a...
I ran 4 gauge tinned marine wire from the battery (Powerhouse Lithium 16v-80AH) to a 25amp breaker then 10/2 ancor marine tinned wire directly to each unit. BOW: 1-93sv UHD and 1-126sv and Livescope....
What is the issue? I can see the panoptix icon in that picture. If it does not see the transducer you will not see the icon.
Is there a code we need to use?
I had a similar issue with my 2007. I had a gut feeling it was the TPS but didn't want to spend $300 on a hunch. After ruling everything else out I bought a new one and the problem was solved. Not...
Mine works fine like this. I have used it in shallow water many times. Maybe early on this was an issue or the one in the video had some issue.
https://support.garmin.com/en-US/?faq=KvAIkAdZNo70j1P0mXu2o5
It says the calibration won't work if its mounted to the barrel. It also says you should use the main engine for calibration not the...
:thumb up2:
Don,
Does it matter which thermostat I use? I did a lookup by serial number on your website and it shows 2 part numbers 885599004 and 8M0057307.
Jeff
Sorry, Added.
In my case there was no debris. The drive home was 30 min and the engine was off for at least 40 minutes before I removed the thermostat and it was still partially opened. I had to run it under cold...
Today I went fishing for the first time this season. I noticed that my engine (Optimax 250 ProXS. 1B447058) was not reaching temperature. It would only get to 116 degrees and it was taking a long...
I have no problem resealing the gearcase myself. My issue is with the cost of the special tools I will need. Its probably cheaper to have someone do it. I was going to go the route Bob G. mentioned....