Serial number is OT 816680,2004 150L EFI
Type: Posts; User: Champ168
Serial number is OT 816680,2004 150L EFI
My motor starts fine at the ramp after the run to fish and then fish for 20/30 minutes .When I try to start the motor it acts like it isn't getting fuel but the bulb is hard so I have to put...
Price on 4" setback
Things done to motor, had ecu fixed ,had injectors cleaned after ecu was fixed it set motor back to break in mode.After break in I changed plugs and still after I run for a bit and stop to fish for...
My motor was flooding after sitting for 30 minutes or more and burning a lot of fuel.Brought it to shop injectors needed cleaning and computer had a cold solder issue runs like a top.So if your...
WILL DO WOULD BE A GOOD TIME TO PUT SOME PERFORMANCE REEDS IN!!
Motor was sitting a while had to clean svt smelled like ether motor cold starts fine after warm up and sits for a while hard to start down on rpm by 800 rpm wot .Pulled plugs and #6 is wet .So I am...
#6 SPARK PLUG IS WET AND FOULED ALL OTHERS LOOK THE SAME WITH LOW SPARK AND RICH FUEL TO #6 WOULD MY ECU BE BAD.
My model doesn't have switchboxs but wire is solid to ecu.
Will try that thanks.
I have low to no spark at #6 cylinder pull coil wires to each cylinder and noticable change in each cylinder but #6 .So I put #2coil in the 6 hole and the number 6 coil in the 2 hole 2hole when...
Yah I'm goin yo try and get that 25 m Pat suggested ,hydrolic steering and jackplate that should get me were I want to be.
When I get off of work in Oklahoma now I'll hit you up and maybe meet up with boat depending on were you are what your location .
I'm in crystal beach texas when I get home we can figure something out. Thanks.
Thanks for the info what prop is the four blade mine has 25p lazer2 3blade
Thanks
How do I upload a picture on here.
Anyone have manuel for 1991 168 in need of one cliffordbray@gmail.com or anything close.Thanks
Dont see much on here about the 168 was it not that popular I guess maybe to short?
Will do 6" instead of the 10 thanks guys.
Thanks guys I'm excited to be back in a champ. Got a 10"manuel plate I can put on it dont know if that's to much would like to bump 70 and show up some bigger boats ya I'm that guy .Thanks again for...
What can I expect for speed from my 91 168 sc with 04 efi 150 merc no jack plate and 24 p prop buying from my brother says it will hit 68 what do the experts think.What mods to help get more top end .