Welcome to the BBC.
I don't know of any source for diagnostics for your engine.
Type: Posts; User: ELGIN
Welcome to the BBC.
I don't know of any source for diagnostics for your engine.
Could be a pack but the stator will do that too on that engine.
That has been answered
Yes, Only works with load on prop in the water, coming out of forward OR reverse.
I am not suggesting you drill the jets, my post was attempting to explain how to check the jets you have with the drill bit, again using the end you clamp the drill on , Not the fluted end. like in...
Glad to help.
That is what we have done to carb engines during rebuild, you may want to check the lower two carb jets to see if they have been enlarged already.
A numbered drill bit set from harbor freight can...
That's the 126776
It will not work unless the engine is running in the water with it in gear, as you pull it out of gear the linkage loads up and for just a second the switch activates and turns three cylinders off.
The elbow for the water pressure gauge is 126776.
If the elbow is on the right of the exhaust hump its the water pressure elbow, if its on the left its a cooling hose to the adapter and its part...
Happens all the time, guys over tighten them and the next guy breaks the top off, just get the area clean and tap on the plastic, don't hit the head, most times if your patient you can get it to...
I would agree with that idea, not like you cant look back and see where the engine is trimmed to.
The lower two cylinders, we would go up two jet sizes to cool the pistons.
I would suggest you not use the dash gauges for troubleshooting, use a volt meter.
Not very, the cap when tightened down is stopped by the top cap, that's why it broke the way it did. You should be able to turn whats left in the head, take a screw driver or punch and a hammer and...
Have you family pull the oil injector apart, most times what happens to them is the internal wire crimps break. A touch of solder and your back up and running again.
Its not difficult.
Dealer will know part number.
Order it from dealer.
About 600 to 800 bucks.
Smoke so thick you could not see the boats.
Your compression numbers look good.
The boating industry has gone off the charts this year but as you are all aware there were several months of no work so parts are not available, everyone is working as hard as they can.
No sir, this is a replacement upgrade that is offered for warranty on certain models.
This decision is made by Evinrude warranty staff should you need it.
It is very involved and it gives you all the latest upgrades, its worth the wait.
My understanding is the kit should be available soon.
Juggy, I was here years ago and the reason I was here then and now is to help the people that own Evinrude and Johnson engines get answers to questions, there have been articles written about this...
Thank you Sir, and from my experience with you...... you seem to be looking for a fight in everything, that's unusual in a person your age.
As a moderator of this forum I will edit posts I see as offensive to the good of this website and this forum.
The owner of this website has already been notified of your posts