Search:

This may very well be the answer, as both MI (piketroller) and GA (Missile Pilot) are at UTC -4 during daylight savings time.

Thanks guys

I hear ya on the Quickstore, Savage....Every so often, I’ll go over a month without being able to get out. I just never know when that will be - just depends on workload, kids...

Remove your bezel (see page 15 of the Gen3 INSTALLATION manual) and send it to K & K Kustomz Hydrographics (board sponsor) for the pattern of your choice.

http://kandkkustomz.com/

Howdy guys-

Any problem with "premixing" Quickare, Quickleen, and Quickstor, then putting it back into the 12 oz containers so that I could just add one container for a 20 gallon top off? ...

Well, Poo.....I’ve got nearly all updates for the HDS series, but don’t have a Live so hadn’t gotten around to downloading the first 20.0 Live update.

I’ll keep an eye out for it and put it in...

What unit and what version are you wanting to have for a backup?

I and MANY others had terrible DI with the 19.x series, so don't go there....I'd leave it at 20.0-63.1.223 for now while others test drive 20.0-63.1.291 released today. I won't get a chance to run...

18.3 or higher for AI transducer support

Yeah, it's odd......

Due to this thread, out of curiosity, I looked at the map card (Lowrance Lake Pro V16) in one of my Carbon units (Pages > Storage > Memory Card), and there are a bunch of...

Does the unit act as if it is loading the 18.x update? When updating (moving to a more recent update than what is currently on the unit), the update should self-install when the MMC card containing...

Being that you drug up a 7-year old post, note that the original post was in regard to a Marinco 2018BP-24 TM plug. To wire a straight 24V (not 12/24V) TM to the plug, it should be hooked up with...

How you load them on the card will be dependent upon what software version comes on the Carbons you are getting installed. This is because the procedures are different depending upon if you are...

18.3-61.1.123 provided support for the 3-in-1. .133 fixed a ethernet waypoint sharing issue, and I forget what .155 did. I've got them in Dropbox, links in this thread:
...

I don't have a Live, but believe Channel 1 is the blue port on the Live and Carbon series

Amazon appears to have various sizes of the Goodyear Endurance marked down currently - got a price match at Discount Tire on 3 this morning
...

Nice - glad it was an easy fix!

For some information relating to NMEA networks (including video), see here: https://www.lowrance.com/help-and-support/?guideTitle=Lowrance-NMEA-2000-Network-Basics---Video&guideId=003-828

I’m guessing your current 2D transducers that came with the Gen2 T’s are both the HST-WSBL skimmers. You will want to keep the one on the rear for 2D while on plane - it is extremely difficult to...

We can all take a stab in the dark, but it would help to know what transducers, exactly, are you getting with the Carbons - Totalscan, Active Imaging 3-in-1, or Active Imaging 2-in-1.

Also, what...

Going off of memory here but.....
I believe what Mike is referring to is the "Sticker Backlight", accessed in Settings > System > Advanced > Hardware
That said, I believe it is only applicable to...

So....it's a chip, not an update....Thanks for clearing that up, Roy!! :doh:

All good advice above. Have you installed a voltage overlay on the HDS 7 to see what that it is reading when the alarm triggers? Once you go through the above and are satisfied everything is good...

I'm fairly certain that is NOT the cable he needs....nowhere have I seen mention of the ol' blue LowranceNET anywhere in the thread, which is what that cable is used for.

OP - if you need a 6'...

The part # will be dependent upon the length of cable you need (2', 6', 15', 25', etc). The new cables are all black, but the red will work if you happen upon one. For that matter, any brand of NMEA...

https://www.amazon.com/Lowrance-000-14193-001-TripleShot-Transom-Bracket/dp/B078Z9G7CT

Or, for a bit more $ -...