Awesome... I will check it this weekend... traveling with work the rest of the week. Will report back... thank you for all the help.
Type: Posts; User: nNed
Awesome... I will check it this weekend... traveling with work the rest of the week. Will report back... thank you for all the help.
Good morning. EuropeanAM was right, I turned off the "Starboard Oil Tank" in the Smart Craft and sure enough... the screen did not get an alarm condition all weekend. Regarding the "slow start \...
Thanks everyone!!! I have first tournament of the year this weekend. Will let you guys know how it turns out.
Got it... I should have realized it was the fill hose... too early in the morning when I went out there and not enough coffee. So if I don't have the float switch and the cap with the nipples for...
Good morning. My tank is a little different. On the cap that has the 2 smaller hoses, there are no wire leads coming from there and I can't find any place that 2 lead wires would plug into. As...
Tank # 2 is set up as an oil tank. Tank # 1 says "Not Connected". Also the Smart Craft show the oil tank capacity is 3 gallons.... It does not look like 3 gallons to me....
The main oil tank, in...
Good afternoon. Engine Serial Number = 1B861587 Engine Model # = 1251P73ED
This week when I ran it, I did not get any warning horns. The Smart Craft did show an alarm flashing "AL". ...
<1B861587>
Good morning. I have a Optimax 250 ProXS. It is a 2010 with 160 hours on it. Several months ago I started to struggle on take-off (RPMs will not come up) sounds like it is either...
Good afternoon.
I have a 2011 21ft Ranger Commanche and the drain line from the recessed area of the trolling motor foot pedal is barely draining. I have used a large shop vac to try and extract...
Thank you.
My question really was more aimed at which spark plug manufacturer do you recommend - Champion, AC Delco, Split Fire, etc?
I should have been more clear in my first post.
Thanks.
Hey guys,
I have a Johnson 225 HO. What is the best brand of spark plug for my engine?
I just went through a similar situation with my Samsung DLP. The unit said the lamp was out, I replaced it for $150, i replaced it myself it was easy or I could not have done it. Still did not...
Great. Thanks for your help.
Hey guys,
I bought new batteries for my trolling motor today. I bought the Diehard Platnimum series from Sears. The batteries showed 3/4 full when bought them. I have always been told that with...
Going back to Belews again today. Fished a tournament their yesterday. Finished with 10.8. Fishing the Tri Cities Tackle tournament.
Thanks guys.
I will follow you advice.
Dal
I was once told that in the winter after you trailer your boat and lower the engine to drain it you should crank it for a split second to make it cough the water out of the pump. Others say never...
Really glad I joined the board. I have been wondering all these same things myself. I have picked up the XD100 serveral times and ready the label only to chicken out.
I switching.
Dal
Thanks Rangerman. I have had Todd do several things to my boat over the last couple of years also bought props and other marine stuff from him.
He's a good guy. If you are ever out that way stop...
Good Morning,
Sorry for the late reply, the wife and I went to the Eagles concert last night. It was great.
Jerry - I have Triton SF21 with Johnson 225 HO. My wife and kids like to wakeboard,...
Went to pick up my boat today. The guy did a great job on replacing all the bearings in the lower unit as well as the clutch dog. Bad news was the forward and reverse gear had slight damage and...
Thank you very much.
Have a great weekend.
Dal
Hey guys,
I have a 1999 Johnson 225 HO engine. It has never idled correctly. It would "sneeze" and "cough" and then cut off. Drove me nuts. I had the carburators rebuilt, the fuel tank...
I may go to Belews today or Sunday. I gotta go see if my boat is ready this morning.
Lesson Learned The Hard Way,
Over the last month or so I noticed that if I spun my prop with my hand (motor off..hahah) it spun but was not totally loose like spinning the handle on your spinning...