Picked my AVX1980 up at factory in August 2018 and replaced cranking proline with a D31 optima in fall 2019due to failure. Now both trolling batteries(proline) have run their course and getting ready...
Type: Posts; User: swampdog
Picked my AVX1980 up at factory in August 2018 and replaced cranking proline with a D31 optima in fall 2019due to failure. Now both trolling batteries(proline) have run their course and getting ready...
Yes mine was not working from factory but bilge was fine. My probem was in wiring dept beside the driver seat.
The wedding took place in a home on Tomahawk Lake in Ohio. After the wedding, the bride and groom rode around the lake for a reception line and was greeted by over 150 people standing at all the...
The 1980 cc is a great boat for many types of water. Love mine.
Yes I got my recall notice and notified the closest dealer. I was told he had 7 new boats and had to do them all so give him a chance to learn the mechanics of the fix. Meanwhile Im going to keep...
Remove console vexus logo plates in console fronts and drill a single hole in the console groove end on each side so that holes are under the plate. use 2 ft LED strips and use wiring that already...
372790SAVES BOW MOTOR FROM HITTING NAVIGATION LIGHT POST
i just posted some LED pics on my 1980
372787 Great place for LED strips in console groove
VEXUS Chevy decor
Keep the revolution alive!
There are 3 coverplates that snap in place on the new G2. Evinrude sent out a memo to silicone or glue them in place. One covers fly wheel and another over the timer/base pointer. If these come off, ...
My 1980 has the flexible bulge directly behind the recessed foot control pan. It flexes but doesn't make a noise.
i keep mine in front hull compartment because it may get hot getting to it in the rear compartments if there is a fire.
http://www.bbcboards.net/attachment.php?attachmentid=348393&stc=1Magic step works great. I weigh 266lbs and used it a lot last year.
I LIVE IN OHIO AND IT WAS WORTH TAKING THE TRIP TO ARKANSAS AND PICKING THE BOAT UP. YOU WILL GET A PLANT TOUR AND BESIDES IT SAVES YOU MONEY ON SHIPPING AND PREP THAT A NORTHERN DEALER WILL CHARGE....
THE TANDEM TRAILERS SO NICE YOU MIGHT CONSIDER DEPENDING ON LENGTH OF YOUR TRIPS. THE CUSTOM COVER IS WORTH THE MONEY AND IS WELL BUILT. I HAVE THE WHITE 1980 AND IT SAVES ON CLEANING AFTER...
Using the Lowrance carbon with the BRP update, I was able to winterize the G2 with a touch of the screen this past week in Ohio. So far I am very pleased with the G2 as well as the whole vexus...
Take some steering blocks with you to keep motor straight.
Lowrance new update allows my carbon unit to show everything a $1000 BRP screen for Evinrude engine would show. My cost was $50 in a cable and adaptor . Now I can Even winterize the G2 150 on my 1980...
My 1980 is first time I never had a hot foot and assumed I was getting one put on until I used the boat. It goes on plane so easy and when Im scanning a new lake you can relax and set speed with...
When you pick up your 1980 there will be a diagram pic on trailer jack showing the 16 inch from ground to base of ball
16 inches from ground to base of ball will work on 1080
yes the compartments stayed dry
http://www.bbcboards.net/attachment.php?attachmentid=338001&stc=1FULLY LOADED WITH PASSENGER, TOUNAMENT GEAR. FULL TANK OF GAS WAS DOING 55 MPH AT 5800 RPM
http://www.bbcboards.net/attachment.php?attachmentid=338000&stc=1 MY FIRST ROUGH WATER IN A LOCAL OHIO RIVER TOURNAMENT TONIGHT HAS SOME 2 FOOTERS,HIGH WINDS AND MONSOON RAIN. THE BOAT HANDLES MUCH...
