I have not changed it since I have owned the boat. Good idea.
Type: Posts; User: Fishnetx
I have not changed it since I have owned the boat. Good idea.
Mine started as a faint miss at WOT now, it spits and sputters to get on plane most of the time, but sometimes jumps right up.
I have a 2002 Yamaha 200 hp HPDI. I cannot locater water separator on this boat. I see the filter in teh canister and I have a medium pressure filter/strainer to replace, but where is this vapor...
replaced the pump motor and it did not correct the issue. Now i get to play the game of find the bad switch..... i have 4 of them. My plan is to start removing the power wires to one switch and try...
I actually tried jumping the relay and it still didn't work.
My problem is the trim motor not going up. While driving, I can keep hitting the switch and it will eventually trim up, but not every time; however, when I put the boat on the trailer, it will NOT...
I am going to remove the hub and clean it off well, clean the hub out well, then replace the seals, pack the hub with grease and then install a new bearing buddy. I am not sure why this would fail....
Did you just put bearing buddy caps on the Cool Hub components? I have a 2002 Ranger trailer and had a bearing go out. I ended up replacing the races, bearings and seals, but packed it with grease to...
I am replacing an axle and trying to decide a couple of things: 1.) do I replace the oil baths with grease? 2.) Do I change the hydraulic brakes to electric?
What did you decide and why?
How do you know if the internals are the problem? How to you check for that?
Yeah, I priced the box yesterday and it is $530.00; however that is the entire box. Isn't it just plug&play from there? I see where all the connections are. Is there something I am not seeing?
Has anyone replaced one of these?
Tilt on the bow is now working. I haven’t done anything. I’m pretty sure that water is the culprit but I don’t know where the problem is.
I am located outside of Jacksonville, in the Tyler/Longview area
That is what I was afraid of because I don't really know anyone I trust completely.
Ok, here is where I am at with it now. When I push a button for a pump (on console and/or bow keypad) there is a click in the power box that contains the main circuit board and fuses/relays, but...
I have already done this. I cleaned a small amount of debris out, but it should not have caused the pump to fail. I understand where you are coming from, but I don't think the pump is bad. I will do...
I could not find any loose connections. I examined my pump and it looks good. I replaced it a year ago. I did notice that I need an o-ring for one of them. Does anyone know which o-ring fits a...
True, I am not blowing fuses. I have found no loose connections. I haven't checked my pump yet, but I am not sure that is the issue. I don't know anyone with a spare keypad. Thanks.
I have a 2002 Ranger Comanche 519 and I developed a problem with a livewell pump last Friday. Everything worked until I tried to turn a livewell pump on and it shut everything down for a split...
I can start a new one. Thanks.
I didn't know there was a Electrical section. How can I get it moved?
Thanks for your replies. I was initially thinking short, but because there are no fuses blown, I was second guessing that. I will have to remove my oil box and the shelf it is mounted on just to get...
I have a 2002 Ranger Comanche 519 and I developed a problem with a livewell pump last Friday. Everything worked until I tried to turn a livewell pump on and it shut everything down for a split...
While fishing yesterday, I noticed that my trolling motor is constantly making a clicking/buzzing noise, even when not in use. It was raining the entire trip and everything was wet, but not sure if...