Nitro Z18, 175 pro xs, 6" jackplate, folded tongue fits in a 21' garage on a slight angle with about 2" to spare
Type: Posts; User: go phish
Nitro Z18, 175 pro xs, 6" jackplate, folded tongue fits in a 21' garage on a slight angle with about 2" to spare
Just installed my Helex 8 as pictured.385820
Thanks, I have the puck transducer to hook up. I guess the built in transducer is useless for me..
There is a small 4 prong 385227385228unused cable (pictured) coming from the foot pedal to the wiring space at the bow. Is this the transducer cable? Humminbird sent me the cable they say is correct...
Morning all,
Would my z7 fit ok on a 2018 z19 trailer? thanks...
I have a 2011 rated for a 200. Have 150 now and best I've gotten is 55.6 @ 5600 rpm. 23P Tempest prop. Only hit that 1 time, best now is 49-51 @ 5500 rpm...
In warm weather, soft science flip flop. Otherwise Sketcher boat shoes. The soft Science 2.0 fin boat shoe looks good, going to get a pair and try them out..
anolog
Serial # 1B851446
The story....New to me 2011 Z7 only runs 49 mph 4900 rpm with tempest 24..Not a speed demon, but would like a little more out of her. Motor idles fine at this time..Dummy me thinks...
I was told 2011 150 optimax proxs plugs should come pre gapped..? If not the correct gap is .043..? Sound right?
They don't...Other plastics destroy them..
http://www.bbcboards.net/attachment.php?attachmentid=314298&stc=1 2011 Z7
Academy Sports. DFI - $39
Nice...Thanks..
Hey Guys...Damaged my Gator Mount where the Trolling motor attaches to the mounthttp://www.bbcboards.net/attachment.php?attachmentid=307301&stc=1
Bolted it shut, and trolling motor still works ok.. ...
Still sick about this...Pulled into a cove, about 8' deep, shut down the motor, put the motor guide in the water and as soon as I hit the pedal, this giant carp (asian?) flew out of the water, landed...
My water pressure drops to 7 psi at wot when I trim all the way up. Should my motor be lowered one hole? Does my trim sender need adjustment? If I lower the trim slightly the psi jumps to 12 psi..?...
I have the same issue. No bow lift, 5500 rpm & 50 mph wot. 22p tempest prop. My motor is on the 3rd hole and when trimmed all the way up at wot water pressure drops to 8. I am going to drop the motor...
I did just fill it when I put the new 22p prop on..I'll run it this weekend to see if any mph can be gained with less fuel...
No hotfoot...I am old school and do not care for those.
I had a 24p but was only doing 4900 rpm and 49 mph. The new 22p gets me 5400-5500 rpm but only barely hits 50 or 49.9 on GPS.. Not sure how a 23p would make a difference..
I will lower it 1 notch...
PSI at WOT is 12
GPS Speed.
I have a new 22p tempest on there now.. Boat jumps up and wants to go, but no top speed at wot over 50. Should I raise or lower the motor 1 notch?
Just had the motor checked out..All good. Motor runs good..