The tanks and caps are covered under initial warranty, but they are not covered under platinum warranty. So get it done ASAP son mercury pays the bill. I’m one month out of factory warranty with...
Type: Posts; User: mmilliken81
The tanks and caps are covered under initial warranty, but they are not covered under platinum warranty. So get it done ASAP son mercury pays the bill. I’m one month out of factory warranty with...
i live in florida, so i just mailed all my stuff to him and had him work on it for me.
Fuel tank inspected and cleaned,Vst and injectors have been put back on the motor,and a full sync and link done. Took it out labor day weekend and she ran like a top.thanks don for all the help.
the end is knurled its not a screen
thats what i was thinking, but it is hollow with no screen in it?
19173found this in my under cowling oil tank. does it belong there,did it fall off of something, or did somebody drop it in there on accident?the gatorade top is from a 32 oz bottle for reference.fyi...
sent my vst to don to have it checked out and fix my fuel leak down issue. i thought this would have been the second time it was cleaned because i had a mobile marine mechanic disassemble it because...
think i found my problem!!!!! i set up a bench test by assembling my injection and vst in the vise and pressurizing the system,then i made a momentary switch and applied 1.5 volts across the...
1757817579175801758117582
brandonboyd,
i am having the same issues you are. i am trying to figure it out also. http://www.bbcboards.net/mercury-motors/251964-01-mer-200-efi-has-not-been-ran-two-years-two-dead-cylynders.html ...
correction,the black smudge was on the top of the intake cover
i pulled the reeds today and they were all intact and looked fine,ther was a lot of gas and oil residue all over everything from the reeds to the intake. ther was also trash in one of my bleed lines...
Did this issue ever get solved? The suspense is killing me:popcorn:
if the weather holds up i will pull the front off and check the reeds and injector harness, so i will be needing some more intake gaskets. will i need any other gaskets?
What benefits would I achieve by upgrading the reeds is it a cost effective upgrade to my fuel economy or is it something for longevity and piece of mind?
I looked them over when I reinstalled the injectors, there was no visible cracks or splits, but that is as in depth as my inspection went
switched the ecus yesterday but still same cylinder has issues.
no this is not the motor that is running rough.
just to verify i started pulling plug wires to see if i had a dead cylinder. the #3 cylinder didnt seem to affect the idle as much as the others when i pulled the wire. i switched the coils, and...
exhaust tuner was tight,but it got me thinking. so i took the hose that goes from the thermostats to the tell tale and out through the exaust off and started the motor. i noticed some exhaust coming...
thermostats and all other "replaceable" parts have been replaced. Since I have two motors, I was going to swap the lower units and run them on the hose, that way I know it's not in the water pump....
I checked the heads at idle on the hose with an infrared thermometer, port head was 145 starboard was 170. The hose between the two thermostats was dry. I removed it and checked the brass elbow...
Fuel pressure reads 34-36 with key on, but as soon as the hp pump stops pressure goes to zero. It does the same thing on the port motor? Maybe my guage is messed up? It's a snap-on that screws on to...
I have an issue with loading up and trouble getting on plane, you advised me to check fuel pressure and I'm picking up the guage now and will report back with my findings on the thread I...
i have been reading posts related to my problems all week. it seems like right when the problem is about to get solved,the updates end. is every one selling their motors because they cant fix the...
