2000 Merc Opti 150XL 0T067559
Hi all,
Had a direct injector reported as bad. Can I replace this with a "blue" injector or another instead of the black original. I've read some things about this...
Type: Posts; User: frankge
2000 Merc Opti 150XL 0T067559
Hi all,
Had a direct injector reported as bad. Can I replace this with a "blue" injector or another instead of the black original. I've read some things about this...
They did not say that they needed to be replaced, I did ask. I also inspected them and they look good. No cuts or cracks in the rubber o-rings and the teflon seals did not have any tell-tale blow by...
just got my injectors back and one of the direct injectors was bad so maybe that with a questionable tracker valve. DO I need to replace the orings on the the injectors and the teflon seals on the...
Hi all,
Going through troubleshooting idle problems with my port 2000 Optimax 150 with ~650hrs. I did see that the previous owner replaced the rails in 2008. It has trouble idling and stalls often...
Barely registers on gauge at idle
Yeah, changed the entire pump including bottom and the compressor screen was clean.
Hi,
Looking to possibly repower and cant find a decent pair of matched outboards out there. I searched but no clear answer. Can I simply purchase a counter-rotating lower for a normal rotation...
Its way lower at idle than the other side, I will be out to replace spring though.
2000 Mercury Optimax 150 0T067559
Hello,
I have a recent issue where my tell tale is non-existent at idle and eventually I'll get a over temp alarm which I assume is from the compressor...
Hi all,
Longtime lurker now new poster. I have a pair of 2000 150 Optimaxs ~600hrs (0T067127, 0T067559) on a 27 Concept. I've mainly been an inboard guy and this is my first outboard and learning...