Separate but similar issue....Has anyone added a drain to the sandwich holder side in the Eyra cooler? That thing is filled with water after every trip.
Type: Posts; User: jv83
Separate but similar issue....Has anyone added a drain to the sandwich holder side in the Eyra cooler? That thing is filled with water after every trip.
I also put a chain on the U-bolt
I'm really happy with the purchase. This is my first cat. I was also down to Phoenix and Bass Cat when I made the decision.
Here ya go....2019 Eyra with TM pedal in back position. 4 baitcast combos on each side. Yard stick for reference. 394379
I'll snap one today if I have time.
I moved the TM pedal back on my Eyra. It was kind of tight standing all the way at the bow with rods on both sides...it also gave me some extra room for a bigger graph. I can fit 5 baitcast combos on...
I'm using the old school pole type that secures to the trailer on my 250 Pro XS Fourstroke. Does anyone see a problem with this? I always thought that I'd rather have the trailer absorb any road...
Seems pretty normal. The Phoenix dealer ripped the cats and the Bass Cat dealer ripped the Phoenix when I was shopping. I agree that the best sales practice is to sell your own products so well that...
Just did this on my 2019 Eyra. Take the single screw out and remove the insert. Insert stays off the boat. You'll then need to reposition the TM pedal, line up the screws (3 on an Ultrex pedal),...
I've got the carpeted insert in place currently. After adding a larger graph at the bow, I think I want to move the trolling motor pedal back and remove the insert. Is this a complicated process? Am...
I took the tubes out...left the butt holders in. Tubes were just 2 screws to remove and could be reinstalled very easily.
That was the one issue I see....maybe the metallic mounts put too much pressure on the glass since they don't flex. Reinforcement seems like a good idea. Thx!
Which mount are you guys using? I see some with RAM mounts...I've also seen some with the metal mounts like a Balzout or Kong. Planning on doing a single Helix 10. Pics appreciated. TIA
I ended up going back up to the 25p Fury from the 24p. Holeshot slightly slower, but the 250 Merc 4s can turn that 25 with no problem. I think the handling is much better. Top speed north of 80mph at...
Opposite happened to me over the weekend...all of the electronic functions shutdown and it turned into a manual TM basically. Needed to loosen tension screw because the electronic assist failed. I...
10-4 thanks
Brand new Ultrex...less than a month old. It was working perfectly.
I pulled it up and ran to a different spot on the lake, put the TM down and the assisted-steer was not working. The spot-lock...
Update: I plugged all of the holes on the 25 Fury. Ventilation issue was slightly better but still noticeable. I couldn’t get the RPMs much above 5500. I guess a 24 Fury will be on order. Thanks for...
Thank you!
BCB what prop is recommend for this setup?
Good info...not sure why the boat came with the 25 prop. I will talk to the dealer. Thanks!
New 2019 Erya / 250hp Pro XS Fourstroke / Fury 25P / Slidemaster setup at BCB factory
I’m getting a very short spurt of cavitation (maybe blowout) during the holeshot. I’m assuming it’s probably...
New Update: 2 of the 4 banks won’t charge at all now. POS is a week old. Dealer should replace with the MK...I’ll be on the phone tomorrow.
Update: All of the batteries did charge after about 36 hours. I have the Noco because I upgraded a floor model boat to a 36v from 24v Ultrex...dealer had a Noco 4 bank sitting around and I took it...
Just brought home a new boat. I have the Noco Genius Gen4 40amp 4 bank charger. Batteries, which are brand new, have been on the charger for about 24 hours...2 of the 4 are still not fully charged....