I did my own shrink wrap cover 10 yrs ago ! I live in the north east ! I made it so the perimeter cord is easy to get at, between the prop and transom corner ! Made a loop in the end of cord, ran...
Type: Posts; User: Mike D.
I did my own shrink wrap cover 10 yrs ago ! I live in the north east ! I made it so the perimeter cord is easy to get at, between the prop and transom corner ! Made a loop in the end of cord, ran...
My deepest condolences to you both on your losses ! Can't imagine what you are going through emotionally !
But what caused the foam to crack like that without impact ?
Spar urethane will not give a good bond for glassing over wood, or to other fiberglass ! IE hull or other parts of your boat/hull ! If you use acetone or styrene to dilute it will penetrate better,...
Quality MFG ! They made the original seats ! If the foam is still good, you can get them reskinned in almost the original colors ! I have a 1999 180 and they did mine over with a few minor...
Get the gel coat from the mfg if possible, if not try to match it, as close as you can ! Clean the holes with a drill ! Put tape under the holes, fill with thickened resin! Leave a slight recess,...
I'll tell you my has SeaStar on his boat, and had all kinds of issues with it ! Note ! He bought it used with a blown motor ! He put a Honda on it and had steering problems ie could not keep it...
So thank you for the responses and help ! I will try to get out this week and see what is going on and let you all know !
Hello all ! So yesterday I tried it again, and came up with same result ! I ordered a new sensor from Crowlymarine ! Then I remembered I had a fuel filter housing, from when Champioman told me to...
Sorry did not check before posting ! Should be green pink wire
Hello all ! I have a 1999 evinrude ficht 150 model E150fpleea serial # G-04615049 ! I'm got code 37 water in fuel ! No problem empty tank, check for any water residue, non, pump out fuel line,...
I have 99 18 ftr have the same locks ! I took 1 apart and the hole size is the same as perkos and others ! The only thing if I remember right was the swing arm ie the plastic may have to be...
Thanks TampaJim ! just sent them a msg ! Up here in Mass. on sale we may see $6 a lb on special sale but usually 8,9 to 10 a lb for brisket ! The prices on the other meats are like holy smokes...
Sorry beenout a bit ! I'll check !
My son has a blown 2000 225 ! I'll check with him ! Mite just have to pay shipping !
I can tell you on our 99 ficht 150 it was number 6 ! It should be out there on the internet somewhere !
All I can say is listen to Championman, and Seahorse, and Rudeman ! They have both helped me for the last 10 yrs of ficht ownership, and not been wrong once !!!!!
Use Drier sheets to store ! But to the problem at hand ! PURE peppermint oil ! That is not the brand ! You need pure peppermint oil on rags thrown in the compartments around the boat ! Make sure...
From what I can see of the dull area, I would get some 3m Imperial compound, ans finishing material ! I had an area that was worse than that, from what looked like scuff from the dock bumper type of...
Amazing !!!!!!
Looks like a dry spot during lay up ! Grind/sand away all the loose gel coat ! Get a 1/2 pint can of gel coat, and hardener ! Fill it in, then add a second coat, and a third if needed, sand with...
Changing to High test does nothing for storage ! High only has A SLOWER burn rate ! ( I used to deliver gas ) Me, I personally drain my tank every fall, and start fresh in the spring ! However if...
#1 Silicone will not stop it from cracking from cracking further ! #2 silicone will contaminate the surrounding surfaces, so it becomes difficult to address the crack ! I would contact Skeeter ! If...
I tried Hey Grill Hey Kosher Salt, Ground black pepper, and garlic powder ! Best I have ever had, but then I'm a newbie on brisket ! She says smoke for about 5-6 hrs, then put in parchment paper to...
Looks like temp to me !