The top of my tag bolts on right below the tail light. Might try relocating it but still wondering about putting 4 leaf springs (2000k each) instead of the 3 leaf that are on it now. Almost seems...
Type: Posts; User: txbasshound
The top of my tag bolts on right below the tail light. Might try relocating it but still wondering about putting 4 leaf springs (2000k each) instead of the 3 leaf that are on it now. Almost seems...
439996
This is hooked to my Silverado
The fenders have probably 1-2" of clearance when the springs are good. I was wondering if I needed to put a drop hitch on my truck but then it seems like the tongue is too low.
In the image, you can see the trailer sits so low to the ground that the trailer tag keeps getting bent so will replacing the 3 leaf springs with 4 leaf heavier springs fix this issue?
Measurements for the leaf springs, off the trailer or under load?
439732
I appreciate the replies about my broken leaf spring. Now I have another thing I'd like to ask about the suspension. My trailer, I've always thought Sat too low in the back. The trailer currently...
Maybe that's where it went wrong. I lifted the trailer til the tire was off the ground and measured straight across from center of bolt to center of bolt. So the tape should lay on top of and follow...
Single axle trailer with 18' bass boat. A leaf spring broke and I'm confused on which ones to buy. With the axle raised off the floor, the existing spring is 26 1/2" bolt to bolt and 6 3/4" from...
Appreciate the input sir. going to fill it again and do another test run. Thinking about using Mercury oil this time to see if the results are different than with the Mystik JT4.
Appreciate the input sir.
The baby blue is what came out of the unit. It's in an old drain pan so ignore the other colors. It came out thick like 90 wt and a clean, consistent baby blue like the photo.
423439
Haven't pulled the prop but I don'r think it was hit. I think the skeg took the impact.
1998 Mariner 150 EFI Magnum.
Just changed out the lower unit oil after clobbering a stump on Lake Fork. The oil drained out had just a little milky color at first, then ran black. Flushed the unit...
Thinking about replacing my 3 blade prop. It's on a 1998 18 foot Astro with a 150 Mariner EFI. The 3 blade that's on it has a pretty decent hole shot and top end ( with 2 anglers and all the gear)...
Thinking about replacing my 3 blade prop. It's on a 1998 18 foot Astro with a 150 Mariner EFI. The 3 blade that's on it has a pretty decent hole shot and top end ( with 2 anglers and all the gear) is...
Thank you friend. I will use this to see if I can track it down. Read another post that suggested it might be the warning module so I'm going to look into that too. This stuff will make you crazy...
LMAO...I'll probably find one on the same day I hit the lottery. I appreciate your help sir. I'm trying to trank down a manual. I found a pretty good one on line but it doesn't show the piezo so I'm...
I took the piezo out and tested it and it's fine so the problem must be in the oil/temp sending units I guess, I'm not having much luck tracing the wires though. looks like there are a blue/white and...
http://www.bbcboards.net/attachment.php?attachmentid=332626&stc=1 This is my 1998 Astro. Thanks again for all your help my friend.
Thank you sir. I will sort through the images and see if I can figure this alarm thing out. I appreciate the info because I had nothing about the boat.
