Search:

Thanks. I appreciate it.

First trip there later this week. Does someone have a fishing report?

I have a 94 Pantera and the steering wheel is worn smooth and requires a very firm grip. Has anyone run into this?

SUCCESS!!!!

The turning points (no pun intended) were rotating the flywheel (that was more of a rotation than I expected, almost 1/4) and the shift spline was lining up but giving some resistance...

Does it make a difference which way I turn the flywheel?

2000 200 hp Merc, 0T068229.

I have successfully replaced my water pump, I t
ook it to the lake on the trailer
and it works right but prop didn't turn so I learned we missed the shift splice....

2000 200 hp Merc, 0T068229.

I have successfully replaced my water pump and it works right.

However, something isn't right, Forward or reverse the prop spins freely so something isn't...

Thanks!!

I am trying to replace the water pump on my 2000 200 hp Merc, 0T068229.

Is the attached pic the right one for the seal on the drive shaft? 365680 I'm 99% sure this is the one that was in the...

Thanks, I never even ran it on muffs so I'm glad I waited.

I decided to replace the water pump and found the last owner put sealant inside the lower unit. I don't see any reason for it pro or con. I picked and scratched on it but stopped when it reached the...

Thats what lead to my confusion, I knew the hub had changed so the new ones coculd be put on other engines but didnt understand the change.

Thanks

I decided to replace the water pump and found the last owner put sealant inside the lower unit. I don't see any reason for it pro or con. I picked and scratched on it but stopped when it reached the...

I publicly displayed my ignorance didnt I. I thought there was a change at some point that let you put them on other motors and madethe bad assumption it involved the thrust washer.

Thanks!

How long ago did they change Renegade and Rakers so they quit needing a thrust washer?

I had someone ask me a question and I said I knew where to go for an answer. He has a 18ft Reatta with a 19x14.8 inch Solas on it and he was told based on rpm and performance he would be better off...

That will reverse the bar indicator?

By the way I have the original manual and scanned it, it is much easier to read than the the original Xerox. I can email I to you if you would like.

Thank you!

I changed motors last fall from an Evinrude to a Mercury and the trim indicator is now reversed. Is this something easy to fix? I had a 94 Evnirude and put on a 2001 200 hp mercury. Its on a 94...

Thanks guys

A 1994 Pantera 2 and I had a 2000 merc 200hp engine put on it with a 24 tempest plus with 3 plugs in it with the holes about 1/2"(?). I have that prop because of my annual trip to Canada can have 3...

I just used VRBO and searched alot using the filters and looking at their pics to find one that sounded good. The extra costs will drive the cost up, I think mine is around 850 for the week but the...

I have a 94 pantera 2 which had a 150 intruder with a 24" Raker. my best was 59.8 GPS at 5400 PRM with 2 guys, loaded, 25 gallons of gas in 60 degree water. I just switched to a 200 so I'll see...

I want to thank Championman, Seahorse and all the others that have helped me over the years with my motor. This is the best support forum for any product on the net. But the last Evinrude/Johnson...

Just what I needed, thanks