So I checked for power going to the GLS10 and I get 13 Volts. When I turn the unit on. It blinks red for a moment that the led goes black. I see no other blinking or lights again unless kill power to...
Type: Posts; User: peteballman
So I checked for power going to the GLS10 and I get 13 Volts. When I turn the unit on. It blinks red for a moment that the led goes black. I see no other blinking or lights again unless kill power to...
still nothing
All good
It does blink red when I do initially started up and then shuts off. but I read that that's normal unless I'm missing something
So I did the update and it still down not show the panoptix icon. I'm not sure of what else I can do
No, I have not updated it. I will try that. Thank you. I do not have a panoptix icon. Yes, the LED does blink red when I turn it on and then shuts off. I tested the voltage at the black box and I got...
What's up guys? I just installed my new Echomap Ultra 106sv and LVS/34. I followed all the instructions and wired it as stated to do so. Now I turn on my units, they both have power, but the head...
I accidentally let two of my lithium ions discharge without realizing it. My onboard charger is a Minn kota mk460 which will not wake up the batteries that are in safe mode. I'm thinking about using...
So the other day I went to remove my transom saver and my power trim wouldn't engage upward to release it. Manually lifted it and then proceeded to replace all the relays with new ones and checked...
So the other day I went to remove my transom saver and my power trim wouldn't engage upward to release it. Manually lifted it and then proceeded to replace all the relays with new ones and checked...
Does anyone know of any issues with networking G3N units with G4N units since the G4's are NMEA2000 and the G3's are not?At least that's how I understand it.
So I currently have 2 Helix 10's at the bow that I use for imaging and charts. I am adding an additional helix 12 and the mega 360 as well. My 2017 Triton Trx 19 Elite has an aux button at the bow...
I'm going with 2 helix 10's and one 12 for the mega live.
So do I just connect the 2-5 port switches together using a port?
Haha. I have an ionic lithium 125 AH to run it so i think its going to be ok. But we'll see.
I want to run 3 Helix graphs (Gens 3 and 4) at the bow. One for mega 360; One for charts and DI,SI; And one for the Mega Live coming out in the spring. I also have the Ultrexx with ipilot.
I will...
That answers my question pretty directly.
Thank you for the insight.
I guess that's what I'm trying to find out
If in Neutral and I throttle my 2017 pro xs it gets boggy and choppy as i compress the hotfoot. My onboard merc module shows the rpms maxing out at around 2700 Rpms and if I persist a few seconds...
It's my understanding that power poles consistently draw on your battery unless there's a switch for them.. My question is what would be considered a reasonable amount of draw from them. I have one...
I will. Thanks
I believe the float switch is internal in the pump
I'll try that and let you know.
I'm reading 11.7 volts between the positive terminal and the disconnected positive wire with the circuit breaker in the off position.
Hey guys,
I have been having systematic power issues in recent tournaments and I have narrowed my problem down to either voltage leak and or battery size for cranking and electronics. I have a new...