Thanks for the info. Yes mine has the braces going directly across. I'm about 200 lbs so I'm sure it would flex without bracing it. But I'm so used to it over the years, prior it would destroy my...
Type: Posts; User: wkblazin
Thanks for the info. Yes mine has the braces going directly across. I'm about 200 lbs so I'm sure it would flex without bracing it. But I'm so used to it over the years, prior it would destroy my...
Has anyone ever installed a recessed foot pedal on this or similar 16ft. Aluminum? Need help deciding if I need to support underside if I can actually install one.
Currently running a 14 225 pro xs on my bass cat eyra. 25p fury, 6000 rpm wot. Any ideas on what the safe water pressure should on this motor?
Possibly buying an 06 202 with a 200 pro xs. Thoughts on prop. It's currently running a 25p 3 blade power tech. I had the same on my 201 pro xl stratos, then changed to a 27p turbo txp. Just looking...
Looking for thoughts on best trailerable cover for the money. Need it for my 03 201 pro xl DC.
Thanks for info. Ran strong yesterday. Hit 70 way quick. But tough to hold it later with 30mph winds. Had more in iteasy
Running a 27p tempest at 3.5 below pad. Runs at 5550 rpm and 68 mph. Also tried a 27p turbo txp. Run at 5650 same height. Run at 71 tourney load and myself. Trying to figure this thing out for a...
Thanks all. Waiting on the pumps to get in. Everything else is carb free. Took a few days. Caked on like a mofo
Thanks. Still not sure about the LP pumps. Not sure I'm doing it correctly. but the O2 sensor was definitely crazy with carbon buildup. The housing is soaking now and then I'll put it all back...
So the three pumps on the side, I loosened the bottom one and barley squeezed the bulb and fuel started to come out. Idk if this is what amistad tackle was talking about but seems to be the case. So...
Awesome. Thanks for the info guys
When running around 68 and 5600 rpm, sometimes it'll randomly bog down as in a loss of power. When it happens it'll drop to about 53-5400 rpm. I just noticed it yesterday, and it wasn't often, maybe...
Thanks. And yeah I don trust mine either lol. And thanks for the good idea. I don't get the greatest mpg so in need of size and what I'm actually burning
Have an 03 201 pro xl and can't figure out the fuel tank size. Anyone know?
Thanks championMan
I replaced my motor for the trim last fall. Been trying to figure out how to add and bleed the system properly. I've done this multiple times and still have issues. It take forever to go down and up....
Thanks. The plugs were fouled but compression is good all around. I use ring free and quicksilver only. I guess I'll take it in and have a diagnostics ran
Still having issues. Any ideas. Dropped back down to 3 in below pad. Only able to get 5200 rpm out of this set up. The other 25p power tech I hit 5500. I need to be running bw 5800-6000 for optimum...
Tightlip I thought about this and I'll check as soon as I get the chance
Have an 03 201 proxl DC with ox66 vmax225 with slidem aster 6 inch jp. Sitting at 3 inch below pad. Running a powertech vmx 25 pitch that's 15 1/8 in diameter. At 5200 rpm running 62 mph. With my old...
Anyone know of a substitute for green marine hydraulic fluid?
Got it out! Ha. Taped it back in and out a few times. Just needed some loving. And I hope that hub gets here tomorrow
Yeah I just tried that. I'm going to let it sit overnight. Hopefully that new hub gets here tomorrow or its back to old prop for the weekend.
Still nothing. Lost hahaha. Super destroyed the socket. It's down a half inch but that's it.
Thanks guys!