Thanks, that was what I was looking for in an answer, my 929 is a floating beast on the big pond. But as I age, I find myself as you are fishing closer and shorter runs. I'm just looking for a stable...
Type: Posts; User: scottyc
Thanks, that was what I was looking for in an answer, my 929 is a floating beast on the big pond. But as I age, I find myself as you are fishing closer and shorter runs. I'm just looking for a stable...
looking at making the switch, not having a Vexus dealer close and not able to take one out I'm looking for some input on the AVX vs a glass boat on the great lakes. My primary body of water will be...
Has anyone used the warranty program, first time with Lowrance, always been a Bird guy. After 1 time out my 3-1 ducer started to split along the seam from the base. the cover appears to be separating...
can the 3/1 be mounted on the port side of the jack plate if i want to leave my Bird on the starboard using the RMP mount, only going to use the bird for nav but would like to have the 2d option when...
i will planning on upgrading as soon as i get them up and running, never had Lowrance always been a Bird guy, switched due to stock and availability
thanks i will grab the connection cable.
i was on the list as well, once it arrived i ended up keeping my 2020, the 22 seamed tight behind the wheel and after reading all the turbo issues i decided to wait a few more years.
Ok, i made the switch from Bird to Lowrance, im going to keep my Helix units for Nav only and not link the 9/12, do i need to wire any of the either power lines or just leave them taped off. im also...
Well just completed the dexter suspension upgrade, what a difference instantly noticeable in the ride and road noise. Replaced the stock set up on the 2007 trailer, took about 2 hours with the boat...
Looking to replace the stock unit with a carbon 9 in the dash, has anyone installed a plate or bracket to mount a bigger unit in the factory hole. checked around and can't seem to find any custom...
Looking to protect the open ports on the back of my bow units from the elements, any tips on what to buy for port/connector covers. Thanks
Question. I have a 2007 opti 225 just switched to a smaller diameter prop are all the prop exhaust gaskets standard
Does any one know where I can buy the swivel wire to build my own rigs, I cant seem to find any with the swivel, only the circle loop style? thanks
Could I need a new sending unit, trim works fine from both locations but the gauge is jumping all over the place, when I throttle down it will sometimes read correct height or is the ground lose?...
Z9 cover will not work the counsel has a different set back, How bad is the cover you have now, night be worth it to have it fixed and sealed, I found one last year NIB with a few mouse chew holes to...
you can call Nitro direct and order the parts, when you buy get extra so you have them on hand, the race and bearings are cheap compared to blowing one out while in tow. Enjoy!
Thanks
I have an older Nitro with the carpet decals on the rod lockers, they are worn and cracked, if I remove them the carpet will have the outline embossed in it, does anyone know where I can get...
I run a 2007 929 CDX on Lake Erie, switched from a Ranger, hands down the best big water boat I have ever had. Huge deck super stable, as stated the hole shot is not the greatest but its stable in...
Thanks
Thanks
All of the above is true, keep an eye on tires, and the bushing fix is cheap but not easy, most of the noise and wear is due to worn bushings,
I have a 2007 Tandem with surge brakes on rear axle does anyone know the brake pad part number, thanks
Replaced the non brake hubs last season, need to replace the brakes/hubs/rotor this winter does any one the size or part number for the Tie Down Vortex kits, also what bake pads it might use? Thanks...
Has any one ever put a Hydro foil on to help with your hole shot, im currently running a 2007 929cdx with a 225opti 24p tempest plus under full load with 2 guys and live wells full she will hold a...