Search:

I drug the file to the card. The computer says the file is on the card.

I must be doing something wrong. Computer says software is on the sd card but units says file is empty?

Help?

There is no power cable running down the trolling motor shaft? This is for Livescope only

Sorry guys, been out of pocket. I wrapped the double transducer wire leaving the black box with a rubber hose (thicker than a garden hose) that I split and taped back together. Then made sure extra...

I isolated my power source wire from the livescope transducer wire & poof ghost tree gone!
I hope this helps if not already discussed on this forum

The compression checks out on all cylinders, per factory tolerance.
Yes, It is still on the boat. I won't take it off until I get the new 4 stroke

I have new 4 stroke on the way.
So I have a 2000 Model 200 EFI for sell
New ECU, Stater & Injectors cleaned.
Compression checks out well
Run real good
$5,000.00
Tulsa OK area, you can still...

I have 2000 model 200 horse EFI for sell soon. It has new ECU, stator & injectors have been cleaned. Impeller & lower unit oil gets replaced every year.
Runs good on my Champion, still on there if...

The rope/cable guide that deploys motor is built in the mount.

Yep. After further inspection the new motor has oval studs to line up and secure the motor. The mount that exist has round holes to receive the studs.
Oval studs don't fit round holes. Well in this...

I had to replace steering module, the new one won't quite seat down in position. Is there a trick?

Who in the Tulsa/Grand Lake area works on reels?

KEN

2000 Merc 200hp, I put in reverse & can't get it out? It has hotfoot, but it won't budge out of reverse.
Shifting box or cable?

KEN

Which is better @ down view & side view with a 93sv plus?
GT40-tm or CV52hw-tm

Why does the depth readings differ so much. i have to look @ other sonars to get an accurate depth. Both the digital reading & the scope scale are as much as 4ft. different of each other & still not...

where is sleep mode?

Jones trolling is correct. Take switch out,unplug wire from switch, clean connection, reinstall. Mine did the same 1 year ago, not had an issue since.
I have done the same on 6 others. FIXED!
KEN

Do I need to put a disconnect switch to the black box or does the electric draw stop when I turn off the 93sv plus? They are separately powered.

I just purchased a 93sv plus for the livescope. I received a transducer with the unit. I already have a 73sv. Do the transducers interchange?
Will Garmin buy back the new transducer that came with...

Thats what I thought!

Thanks KEN

So do I grind out hole to get seat post to go back in hole of deck? Im getting old and need to sit down every now & then!

Thank You John

I have a question, I guess this where to ask it. If for any reason the steering cable breaks, can the ultrex be controlled by the remote or am I dead in the water?
Thanks

I have a 73sv, it all of sudden started getting vertical lines on traditional screen from the merc. The power source is from the trolling battery. there is no connection between the two.