Does your boat have the gauge in the splash well? The reason I ask there are two different implementations of the blue can.
Type: Posts; User: ChuckH
Does your boat have the gauge in the splash well? The reason I ask there are two different implementations of the blue can.
Don may want to chime in here, but I believe the section where you read about Adjusting the helm ID only applies if multiple VVLs are installed with their own mercury monitor and or a MercMonitor is...
the 3100 is Ethernet connected thus the live will benefit from fish reveal hd. The 3100 processes that info.
That is trolling motor battery health. The trolling motor must be on and the little blue transducer must be connected.
I ordered the Ranger Steps for my z520r. In order to install i removed the fiberglass trailer step and cut the mounting flanges off. Grind them down, and repair the road armor and re pin the strip....
You are correct, have a suspicion that with the mercMonitor they are using a Level3 for gateway functions and not installing VVL. Just wanting to confirm.
I posted this question on the Ranger z520r / z521r Facebook page but got no responses. So here goes:
Questions for those that have the optional MercMonitor in their R Boat.
Does the boat...
Email sent
I am told, that the Ride System will latch on to the lowest NEMA source address/instance for GPSs PGNs. Wonder if the birds GPS Puck is delivering heading / SOG in addition to LAT/LON? The first...
PM sent
Email with pdfs sent.
The Ride System uses the Point 1 for GPS PGNs. This is all handled over the NEMA 2000 network.
pm sent
During the re-set of the MM, VVL was online and communicating. Durning the MM reboot it displays 'Helm 1." When I go to the VVL configuration screen it shows it is also Helm 1 & Instance 1. The...
Thanks Don, I did as you instructed. It still shows as Helm-1. Is Helm and Station different things in this case? I cannot see any reference to Station, but maybe it worked, and i just cannot see...
Thanks Don, we will leave MM in non gateway mode, which will prevent N2K communication. So given a single engine do i need to separate the MM and VVL to two different Helm IDs since both say they...
Thanks All, some clarification is indeed in order. Two Boats involved regarding my questions and follow-up questions. Both are Ranger Z520Rs and both have VesselView Link current software version...
Thanks Don, as a follow up is there any way to easily see if the VVL has latched as station 2?
Noticed on the VVL configuration screen it defaults to helm 1 but can be changed to 2. Is this what...
Question, 250 PRO XS 4s (3B172310): Don a question regarding if both a MercMonitor Level 1 and VesselView Link were installed on the network if there would be issues regarding master instruments,...
Future support for gigabit Ethernet. Current implementation is 100 megabit hence Rj45 8 pins with only 5 pins in use. Gigabit uses all 8 pins of the rj45 connector. Suspect they went with 12...
I found a picture of the 16 in my 2019 z520L
542395
I had a 2019 520L that I ordered with HDS 16 in the dash. So I know it works. I’ll see if I can dig up some picture of it.
See your private messages.
Nope…but I don’t see why you cannot paint them. I kind of like the grey. Goes with grey outline on the lettering.
Atlas is a resistive read from the sensor. The sensor is connected to the dameron digital switch under the dash and the ride system pulls from there. For bobs jackplates that is pulled from the...