Search:

Haven’t been home to check the paper work and can’t find the email but I did order oem everything.

Heck I’d keep the engine I’d buy if it if he decided to sell

Order them through Crowley marine with the serial number I’ll check the invoice for part numbers tomorrow and report back.

I’ll check through the flywheel with a fine tooth comb.

It makes the noise till I get on pad for sure past that it’s really hard to tell while driving with the wind and normal exhaust plus I’m sitting in the drivers seat.

drained the tank and put fresh 91 it does have ethanol but it is all I can get in my area.
and mercury premium plus 2 stroke with quick clean and quick care. On the break in run we had the oil...

Has a set of Carson’s reeds. Other than that it is all stock. Should also add I have a back up set of computers and a second harness swapped those on to it as well.

Nothing that we have been able to find and it hasn’t been for a lack of trying. Even if the engine is trash I just want an answer at this point. I’ve looked all up down and which way in the mid. ...

250xb serial OT652622
video of the issue https://youtube.com/shorts/zuEgekDZ9kw?si=2320NG48szGQI3D-
long story short lower locked up solid running about 4500 rpms. engine ran flawless 118-124 psi...

thank you for the honest and detailed answer. It’s a been hiding in a garage for about 10 years. Now to see if we can agree on a number.

Putting some serious thought into picking up a bullet 21xdc. currently in a 21xl stratos with a fairly hot 250xb. Will more than likely be swapping the xb onto whatever hull I pick up just have a...

Went out to the lake and that noise is what I found. Idles smooth comes out of the hole good again but I shut it down pretty quick because of that noise

The injectors are up to par the flow even and run great just not on the engine I believe I have that one solved though ran a new power and ground to the engine from the battery noticed some white...

Double post

Yes engine was running great. It’s always had a little stumble at low rpm “going through a no wake zone” that nobody could figure out had it at 3 different shops here. I ended up making new power and...

Serial OT652622
Kind of a long story lost my lower unit about a month and a half ago. While the boat was down I had the vst and injectors serviced also new set of plugs seemed like a good time while...

sorry forgot the on the serial. I ended up getting it running “terrible” and back onto the trailer I have 3 injectors that are not spraying worth a crap just had them serviced and cleaned about 2...

Have a constant beep alarm turn key on and get the initial beep and it continuously beeps while engine is being cranked and ignition is on. No fire.
engine serial 0652622
03 250xb

under 85 unless I strip it down and try to go fast even then not much past that. I’ll pm you my number.

serial OT652622
I have a 250xb lost the lower yesterday had a gen 1 on it but they are hard to find can I use a newer lower on this engine. It’s on a stratos bass boat so not sure what would work...

Move if not aloud. I need a gen 1 torque master cash in hand call me 702 419 5416

I am fine with that I also have livescope coming and will probably only be using it on that setting anyways.

What adapter do I need to use my helix 9 DI with the ultrex I just ordered. That’s the description from bass boat electronics. Just want to be able to use the 9 through the Tm to simplify wiring. ...

Sold

Wanted to update this. I ended up having two broken reeds and I adjusted the tps. Also had the injectors cleaned runs great now!