Search:

:thumb up2::nanner:

200 w/10" JP = 70mph

Right on, keep us posted on how it turns out.

4 Blade, PT TR-04 ~ Plenty of lift

My X-19's did really well with a PT TR-04 25P, but that was on a V-Max 200

Hey guys, spoke with the local Xpress dealer in Baton Rouge last week. Think I'm gonna go with a Trophy Plus 26P. Was told the 26 would put me around 74mph with good hole shot, whereas a 27 should do...

*Following

Picking up a 2001 X21 DC w/2000 225 Merc EFI next week. Boat currently has 25P Tempest & only does 60 or so. Thinking I should be able to get at least 70 out of it? Debating on a PT or...

Openfacereel, I would pass on that H-51, it’s under powered. I had a H-51 with a 115 Yamaha, it ran around 55mph. Yeah, it might drink a little more fuel than a 90hp, but for performance, it’s worth...

I've got mine mounted on the bottom side of the battery access door, when charging just open the door all the way so it's well ventilated.

http://www.iboats.com/

Well said, preacher ed. Curious as to know, just how much money was brought in when the Classics came to town?

Clean lookin' rig ya got there! I would start at 3.5" prop to pad.

Yes, it's the stock OX66 lower unit. Think I'm at 4" prop to pad right now, still playing with that. May end up putting the HPDI lower, if I don't bite the bullet on a new SHO...

Not only that, there are numerous sand bars that have been created b/c the flooding. Some of the oxbows you can barely get in now. It's really sad, the Red River used to be one of the top 10 ranked...

Yes, raise the motor with the jack plate but keep an eye on the water pressure. When the boat starts chine walking, there’s too much prop in the water. You have to create somewhat of a down force,...

Thank You, Sir!

drjkl1, great post, welcome to the Xpress boards. Ya know, some pics would be great, everyone might wanna play then?!

Almost bit the bullet on a used X21 myself a few weeks ago, but the...

Right on!

As far as flooring, carpet or bed liner. On my current boat, we pulled the carpet out, sanded down to bare metal with a side grinder & wire wheel. Picked up some Tuff Coat from BPS & topped it off...

I have stripped an Xpress hull before. I used aircraft cleaner to remove the paint, although I had to sand the self-etching primer with a DA sander to get down to the bare metal. I did not clear the...

From Ranger391v's post, I'd say yes. The difference in the X & H hulls is the flooring layout. The X has more front deck with the option of a passenger console, the H has more open floor space with a...

Food for thought, anybody who does the salt water thing with a freshwater boat. Ya might wanna pull off the prop & put some anti-seize on the splined shaft. Just had to replace my prop after rescue...

Guzenua s right, max out the HP, you won't regret it. What most people don't realize is that a larger motor will not have to work as hard to push the boat = longer engine life. Plus, you will have...

Acetone

http://www.tacklewarehouse.com/Organized_Fishing_Modular_Utility_Box_Racks/descpage-OFMUBR.html

Max out the HP, you won't regret it....