I kinda figured he had a pool sub panel outside but that’s just a guess
Type: Posts; User: josie201
I kinda figured he had a pool sub panel outside but that’s just a guess
to make things more interesting this is a pool they are dealing with
What size conduit is already there? How many circuits already in conduit. Still doubt you need a white, likely has a control transformer that’s rated for 240v. #6 is likely good along with a 10...
Why trench? Everything is on the same wall. 60 amp chiller doubt it needs a neutral
Need to replace the rotor and caliper on a 920 phoenix trailer. Any body know what material they are made of. Zinc, stainless or aluminum
thanks
I am just didn’t go into the details
Ok, thanks for the help
Serial# 2B362821
Motor will be unused for a little while, as my injectors are being serviced. Is it a good idea to do an oil prime once things are reassembled, before the first start. I have the...
Did he bypass the fuel selector valve in the bilge, and tie the one straight into the motor
maybe boat salvage yard. Wonder why he took it out?
for sale? Listed where?
Pretty sure they are 25 gallons, at least mine are. The fuel selector valve has leaked twice on mine and have gone to a manual 3 way valve set up. That may be why you only have one tank , selector...
duct tape acceptable
Serial #2b090964
Anything special i need to cover up if I remove fuel rails and injectors, when sending out for service? May be 3 to 4 month before things would be reinstalled
Serial #2b090964
I have an older stratos that the fuel tank divider has started to ooze fuel. Replacing with a brass 3 way valve. Can I use a small amount of dawn soap on the valves barbed...
Thanks to both. What I want to accomplish is keep my foot on the pedal for steering, start and start with thumb or finger. Like a jog mode, but don’t want to be in spot lock mode
Have the tour right now, thinking about tour pro. For those that have the tour pro, can I use the remote to adjust speed and do foreword and reverse. I want to leave my foot on the pedal for steering...
Do they make a seat post that will go up and down, and also allow me to tip the butt seat to various angles (lock in place at preferred setting) 3/4 or so post mount base is in the boat now
try this one
Didn’t notice water from motor mount area, but what we noticed was water at rear of motor coming out of gasket area. The one original gasket was slightly different than the new one, notice old was...
Picture of the other gasket, the replacements look like this one525104
Serial #2B362821, and 2B090964
Power Head Gaskets from our 2 motors, why the differance? The one that is showing the tear directly behind the lower crank case seal location, could that be why we...
much appreciated
Those would be at 25 ft lbs
Would that be #5 and #6 in the torquing sequence