It's fixed and running!!! Replaced flywheel with new nut and washer plus loc tite torqued to 120 ftlbs and now let's see.
Ran great this weekend.
Thanks for the help!
Type: Posts; User: ragraves
It's fixed and running!!! Replaced flywheel with new nut and washer plus loc tite torqued to 120 ftlbs and now let's see.
Ran great this weekend.
Thanks for the help!
Thanks Joe
Awesome! Thanks
So my flywheel showed up today. What torque sheeting I should tighten to?
Should I have any concerns about purchasing a used boat with a Honda 250 Vtec 2014 with about 350 hours on it?
Thanks blackboat. I will give it a try. Just bought the fly wheel.
I can't figure out how to post pictures but it looks like the crankshaft is missing two theeth.
Do you think blackboard idea may work?
I am going to try the above suggestion from blackboat.
Thanks JOE54
I have splines missing on crack shaft.
Question to everyone since the motor is a 1998 should I rebuild the motor when I replace the crank shaft
or should I buy a new motor?
I will post pictures tomorrow.
Found out it has stripped out the flywheel. Second one on this motor.
1998 Mercury 200 EFI SN: 0G750902
I have recently changed the inner and outer switch box, water pump and new battery. Boat has run fine for two weeks but just electrically skip about four or five...
It is not to heavy but it is awkward to hold. I have a nice bruise on my arm now.
Thanks. Love the support from this site. Thanks JOE54
Hez, It really was not that hard of a job. The lower unit did take some force and shaking to get it to let loose but did not have to use anything to pry it off with. I used a plastic milk crate...
I just read your reply JOE54 and I do still see water coming out around the anodes. Is this a problem?
Hey thanks for the reply. I took it back apart and put it back together and it is working now.
Not sure what I fixed. I understand that if the thermostats don't open then water will not come out...
I replaced the water pump kit in my 1998 Mercury 200 EFI SN: 0G750902 and now the water pee hole is not peeing at all. Motor starts and goes in gear and prop turns. I have tried both water muff...
Maybe interested if they will fit a 97 191 elite. How much and do you have a picture?