Worst issue with these was diaphragm failures in the mechanical fuel pumps mounted to the side of the block. When they fail un-oiled fuel goes through the pulse ports that operate these pumps. This...
Type: Posts; User: fishhawk5
Worst issue with these was diaphragm failures in the mechanical fuel pumps mounted to the side of the block. When they fail un-oiled fuel goes through the pulse ports that operate these pumps. This...
To replace a long block without removing the valve covers and putting water pressure to it first seems nearly criminal on Yamahas behalf. After what I learned on the first engine with leaking anode...
6CBL1007844 Trying to show what I've learned myself. This is the second one I've worked on personally. The first I did had water in the oil as well. The problem on the first was leaking internal...
Is the hull the same on a 2003 and a 2018?
Have a friend with a 2003 TR21 that the box frame trailer is rusting through in several places. Looking to find a solid used trailer intended for this hull. I'm not sure what all years of the TR21...
I just added a 360 with my LVS32 transducer to a Fortrex. Wanting ideas on mounting both transducers for fishing very shallow water. I want the 360 as low as possible to read with the Fortrex slid...
That now makes more sense about why I am hearing the TB reset. I must be getting a very quick intermittent up signal from somewhere that will cycle the TB and not engage the trim. When the signal is...
2021 Pro XS #3B045329 66.3 hrs 2021 Phoenix 921
This engine will randomly trim itself up when nobody is around. Sometimes you can listen closely and hear the throttle body cycling like it does when...
I have livescope/93sv uhd and a GT54 on my trolling motor networked through GMS10 to the console 93sv uhd, where does the digital depth reading that can be displayed on the livescope screen come...
If I'm running 2 UHD 93sv's at the console with a GMS10 network can I hook my gt54 to one unit and a gt8 to the other and still display on-plane depth at either unit?
How is this done when a 93sv only has 1 transducer port on the unit?
Ordering new Phoenix! Will a Fortrex with built-in transducer work with a 93sv uhd? Or should I just put the gt54 on a non-transducered Fortrex?
I have my 93sv at the console with the gt54 mounted high enough on the transom to avoid damage bumping over logs/stumps. How do I then get a depth reading on the same 93sv on plane? I have a second...
Try bringing you engine down a full inch just to see if that helps. Never had much luck running high with a big load.
Yeah, my Bullet (21xrd 250XS) is pretty fast, but I am also a serious and fairly successful tournament angler, but I love my Bullet for other reasons too. I fish several lakes and rivers that are...
Refer to my post on the "wheel bearing question".
Depending on the year of your trailer depends on whether it used oil or hybrid grease. For sowenssw, I would recommend having someone drill and tap a new hole for a plug in your messed up rotor and...
Bullet has a drain available that they made since the original is no longer made.
If you leave the lake with any water in the bilge it will run to the front and come over the flooring. You may notice the floor of the front center hatch being wet as well.
I sometimes wish Bullet would modify the transom to do away with the need of so much setback. Picturing something similar to the old Ranger VS (sorry for the language). Wouldn't be as sexy maybe, but...
They don't make that valve anymore, Bullet has a pieced together one that works. I remember cutting it as short as possible to make room for the cable. Empty main tank helps alot too!
Fish lake Erie, wouldn't go out without a foil on my 21xrd. Se Sport 400 requires no holes to be drilled, no issues with mine. Best addition to a Bullet IMO
Replaced the check valves, pressure relief valves and all seals, works perfectly.
Yes, the boat was sitting level. I've ordered a seal kit. and plan on taking the pump apart to inspect. Spent many years working on hydraulic suspension on Benz as well as automatic trans, clean...
I tease Teresa at Bullet when I call that I'm still the only bullet owner to qualify for the Bassmasters Classic...
1994 8th place, running a 20xd back then. Now running a 21xrd.