OHHH ya its the 60in. I live in Washington State and fish some rough water!
Type: Posts; User: Midnghtshdow
OHHH ya its the 60in. I live in Washington State and fish some rough water!
Okay, Have you done this?
Does that void the warranty?
No everything as they told me swaps over. I had a dealer do it for me.
Just got the motor to 5 hours and it runs well with the Iclass. Also think it looks good! Also upgraded to hydraulic jack plate. Had it up to 72.5 so far fully loaded. Will go faster soon!
It is cheaper to go with Yamaha. They don't have to run any new controls or gauges. It bolts right up.
Any speed loss or ride difference?
I'm repowering my 2008 I-class with brand new 250 SHO. Anyone do this yet? Any tips and tricks? Loves/Hates? I love my HPDI and little nervous.
Did you recently grease the fittings on the motor? Or have a shop service it? Sometimes 2 stroke oil comes out of the intake and drips in the bottom of the motor compartment and that can give you...
All you might have to do is adjust the Hot Foot.
Wayne, What settings you running?
Great boat! Little rough in rough water cause its so light. Motor is awesome as well if you keep up on the maintenance that has already been stated above. Loved the fuel mileage also!.
Blink Marine makes new computers.
Well I goofed and forgot i don't have 9's anymore and they are 10's so i had the wrong software.:confused2:
@ slydoggie I knew about the additional numbers so every time I made sure to delete the old copy.
@ Wayne P I am DL the correct version. I will try the tip of putting the card in the unit to...
Trying to do the new 2.80 update on Helix G3N and the unit is not recognizing the update on the SD card. I have formatted the card, this card is the same card I use for all my updates. See below...
I had to update mine to all the newest software, The I had issues with ping rings at about 60ft really bad found that now I had to turn off the other transducer pinging for my SI that was on the same...
I tried that it did nothing here is what it looks like. HB wants me to check a fuse in my TM head to see if that could be causing the interference but i have never had this issue ever before. 505160
They had me update the firmware on both. Now it reaches kinda out like it should but have ping rings right at 60ft that I never had before.
Got out today. Here is what it looks like.
I also reset it and still the same. 504178
SlyDoggie, I have not had a chance yet been working to much and its getting in the way of my fishing. I just reached out on here to see if someone had the same issue once and found a quick fix. I...
Les, You are correct and that it does fine at. It will shrink the distance in the screen. Before I could zoom in on 8f depth by 90f distance and it would fill my whole screen. But now it will...
I usually set the depth on my Mega Live Manually. I switched it in a tournament to auto due to all the different deeper depths I was fishing. Now when I set my depth manually at the lower depths...
Sounds like new updates might have been released......
I still use mine and love it. I had to replace all my actuators when my brain fried. It made them keep actuating until they melted. I did find replacement and have one sitting at home if I...