Search:

ill see if i can round up a test ecu. recently had the injectors flowed and looked at the reeds. they all looked good and closing corectly

well i did a drop test and the motor dies when i pull wires 1 and 2. cant tell a obvious change on any of the other 4. it smells like its running rich and in checking to see if the vst is overfilling...

i cant see the miss with a spark tester everything is firing. can only hear it and its down on power. oem known good not new coils. with a spark tester everything is firing. most testing has been on...

im hoping some of yall can offer some advice, im trying to help a guy that i work with on his motor. it has a intermittent misfire. sometimes it will run like it is supposed to and other times not,...

:thumb up2:

does this include the hose?

this post may be better suited in the restoration forum.
Have any of you guys had any luck restoring the badges or know of a replacement other than a custom domed decal?
no longer available...

Tow vehicle keep sblowing fuses when putting into reverse only with trailer attached. Drives fine without. 2 blown fuses in 2 weeks. All light son boat work. Something not connected? I'm scratching...

great job :nanner:

your right one direction is on and the other is auto. sounds like the timer may have gone bad

You can take it to a canvas shop and have it surged or edge binding sewn on. Only other option would be to get the adhesive backed edge molding

What is the issue? I’ve never been able to fill mine any faster than the slowest notch on the nozzle without it coming back on me.

I have a 2001 202 pro v
can anyone tell me if there is a drain tube for the front ice box? Mine is slow to drain.

i cant say for sure because i havent run into that issue but you may have to trim the original face plate. id look at it good or possibly wait for someone else to offer their info before cutting...

the jacket is only there to prevent chafing on the wires, no connections inside.

maybe some of the experts will come along shortly. what brand steering is that? should be able to find a kit that includes everything if that is the tiller plate bushing,

boatbuckle offers a small bezel for the new short gunwales. 402763

0t430598 2002 225x

i know temperature is critical with a optimax and some of you run washers in place of the thermostats in a promax. considering the x is somewhat in between, should i be running...

just wanted to thank everyone for their input in helping me get this thing figured out and running like its supposed to. i havent yet put it on the water but running on the hose it seems to be...

Thanks don. I’ll look into that

update. im starting to feel like im chasing my tail on this one, get one thing fixed and something else shows up. seems that all the running issues have been settled with the pcm repair. idles good...

That’s what I figured

+1 if you have existing traditional back up lights the wire should be sufficient for these. They don’t pull much juice

ok don, just got the pcm back from simon. they repaired a burnt lead plug b, pin 1 and a function chip. they also noted that i should check all coils before reinstalling. in doing this i have found...

Hoping some of you can help me. Is it possible to remove the gas tanks without pulling the top?