I had a gen 1 case on my 2010 250 proxs and I had the same problem on my blazer
Type: Posts; User: blazinduck
I had a gen 1 case on my 2010 250 proxs and I had the same problem on my blazer
Thanks yall. Looks like I'll be dealing with the blowout until I buy a hydro. Can anyone answer the question as to why the bullet is so bad about doing this?
as the title says above im running a 2014 bullet 21 xrs with a 2014 250proxs with a 28p bravo 1 xs with 8 pvs holes.
I having problems with the prop blowing out as he boat begins to brake over to...
im running a 2014 mercury 250 proxs with a torque master
Why does my boat blow out so bad as it is braking over to plane. It'll get to that point then it'll just slip. I've plugged some of the holes in the prop and that seemed to make it a little better...
I HAD TWIN BLADES ON MY 202 AND IT KILLED MY HOLESHOT AND REDUCED MY TOP END BY 3-4 MPH BUT AFTER RUNNING TWO BOATS WITH POLES ILL NEVER GO WITHOUT THEM . IM RUNNING TWIN 10' BLADES ON MY BULLET...
hey of your wanting to try a T1 I have one ill sell you cheap so you don't have to buy a new one.
that 26 didn't. it blew out anyway I did it. but im not worried about it anymore. ive got a guy coming to get it next week. then ill be ordering my new rig
Your best be is to get you some red scotch Bright scuff pads and hit all your hard to get areas
Thanks
Just going to sell the whole rig and start new with a 625
So I could take off without blowing out with that 26p prop. I bring it up when running my bravo. But with that 26 I was turning 6200 with it all the way down so I didn't want to come up with it. I...
With all this prop talk what should I try next on my 202 with a 250 proxs dual blades and hydro jack plate? I'm running a 28 bravo now and can't turn the rpms. Where should i go from there prop wise?
If you call blazer and talk to Keith he can help you. He's a nice guy that is ready to help his customers. I call up there all the time getting new stuff or needing advice and 95% of the time I get...
I ran a 26 three blade and was running 70-71 at 6200 rpm today on one pass. Need more than a 26 3 blade for sure. That's with the jackplate all the way down. I also ran my bravo with the plate all...
I know a few people that run the 29 bravo with single power pole in the winter months that runs low 80s ready to fish. I also talked to blazer and they said that's the same prop they run on their...
12" hydro. I've tried all different levels with my jackplate. Before my poles with my 225 I ise to run 77-78 with a 27 txp. Loaded .
afrer the poles I could only run around 75. With the new motor...
Ok guys I can't figure out what the heck is going on. I have a 2006 blazer 202 prov with a 2011 Mercury 250 proxs. Hydraulic jack plate and dual 8ft power pole blades. I called blazer and asked...
Don't have one right now I will once i get home from work this week
has anyone had any issues with cracks in their transom on a 202pro v? I have an 06 and noticed a crack right about the carpet on the back deck and a crack underneath the rear deck lid .
rebel
how does your 202 run with the sho on it? what speeds are you running and how is the hole shot?
update on motor.. I changed all filters and spark plugs and it runs good now
im swapping from Yamaha to mercury and am in need of all rigging for the swap. where is a good place to get everything? or are there any parts from my Yamaha that will work with the mercury. I and...
I love my blazer but im wanting a new one plus more deck room which the 625 pro elite blazer has. but when spending that kind of money I want to weigh my options.
I love a fast boat but I also fish...
Ok I'm selling my 2006 blazer 202 pro v with a 225 vmax and I'm torn between two boats and can't make up my mind.Both boats are brand new and will be ordered. Triton trx 20 partiat Comes with 250 pro...