I use the cleat and bungee rope from amazon below. I prefer it to a cleat on top because when not in use i can tuck the rope away under the shifter and its out of the way. You can look at the 1:02...
Type: Posts; User: fishnbound
I use the cleat and bungee rope from amazon below. I prefer it to a cleat on top because when not in use i can tuck the rope away under the shifter and its out of the way. You can look at the 1:02...
I replaced mine with the strap below with the boat on the trailer.
Amazon.com: Fulton WS20HD0600 Heavy Duty Trailer Winch Strap with Hook 2" x 20' : Automotive
I use the Sonic Hub 2 and control it thru my Lowrance Units. Mounted in Starboard rod locker.
I know you go into categories and turn something off just don't remember exactly what it is.
I use the Hoover Dam Gutter Guards from Lowes and they have worked great.
If a one hour time change bothers you be very thankful you don't work a swing shift.
Great idea. Just ordered me a few. Link attached if anyone is interested.
https://www.harborfreight.com/self-adhesive-rubber-safety-step-mat-98858.html
I pull a 34ft Travel Trailer and get around 9.7 MPG while towing it. I get about 14 when pulling my Nitro Z20.
I went under the rub rail on my Nitro Z20 and love it. As long as you have a good flat surface for them to stick to I do not see a problem with it.
The fill does not automatically turn off. If you have it on high it will run all day. If you are making long runs I would consider turning the fill off and recirc on.
Yes they will go between the cooler and the fiberglass.
I run Lowrance so I have a Sonic Hub in the Stbd Rod Locker. 6" Kicker Speakers mounted in front of cooler. Sounds great.
I have a 2019 Z20. I took mine in for service in Feb and told them mine was doing the same thing. They told me this was a common problem and they replaced it with a sealed one. It was covered under...
I've got a 2019 z20 and when I tighten mine up I am able to move it up and down about a 1/4 inch. I've never attempted to tighten it more than hand tight. I love having the passenger console but...
My jackplate had a hole on the front of it already drilled. I used the bolt and spacer included with the bracket to attach it to the jackplate in that hole and get it level. I then marked the spot...
This is where i put mine. Got a much better image after I added a hole shot plate.
379308
I use the ones below. Run a wire thru the trailer and tap into the blue reverse solenoid wire.
...
I went back ad looked and mine is a PROcise Dash Mount... Not expensive at all and rock solid.
...
I have a single HDS 12 and went with the BBT console mount. I did not want to flush mount because I like being able to tilt the unit. I also like the unit being closer to the wheel so as I'm scanning...
I have the same boat and have fished in some pretty hard rains but so far my lockers have stayed dry. I have had water get in the compartment between the seats. I also had some get into the rear...
Are you using speedo or gps for speed reading? I can't see how the hull has anything to do with speed fluctuation. Seems if that was the problem it would always be a problem.
I have one cracked currently. The thread below discusses this issue. I'm going to try some of those washers.
http://www.bbcboards.net/showthread.php?t=966545
I purchased the wire puller in this link and it has been a great help in rigging my new Z20. https://www.amazon.com/gp/product/B0763V51CS/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
2019 Z20. Anyone ever installed Bluewater UV Blacklights under the rub rail? Boat has a flat surface all the way around in this area. I love the looks of the Nightfishion but those are more than I'm...
Mine does the same thing.