I had to install a threaded access port in the same place as the trim switch cover but on the side with my trolling motor. That allowed me to though bolt all of the bolts like you are talking about....
Type: Posts; User: Baddodge
I had to install a threaded access port in the same place as the trim switch cover but on the side with my trolling motor. That allowed me to though bolt all of the bolts like you are talking about....
Not sure about the h20 but I can squeeze a 9 ft in my h22 bay
I completely agree. No different than buying a toolbox for a truck plus this ones painted. Completely worth it in my opinion
The box is 38” wide. They are intended to mount directly to the floor . I ordered from xpress through my dealer. Make sure if you go this route to specify your boat model as they are all different...
https://s9.postimg.org/x2mlsserz/87808_F0_E-2_FCE-47_AC-_A02_A-0_FD84064_E770.jpg
That’s weird it shows up on my screen. ok let’s try again.
Yessir
It’s not on the link, it’s pasted in a post on the second page of this thread.
Got it!!! Thanks for the link!! So there it is. I can post pictures of just the frame if you need but that should give you an idea of how it’s mounted. The box is intended to be just screwed to the...
https://s9.postimg.org/tqvly490v/6_F142_AE1-576_E-449_C-_BDD6-7_BE1_ACCEDB6_A.jpg
http://www.bbcboards.net/webkit-fake-url://c3cb91a9-1d3b-4457-8c42-533b5bf768c5/imagejpeg
https://postimg.org/image/t1ctlr8h7/
has something changed on the website? I cant get my pictures to load anymore. I got everything finished up last night but cant figure out how to get pictures to load on here now.
Got everything fabricated and primed today. Once I get the frame painted and Installed I’ll take pictures and post em. Think it’s going to work out well and get some bonus DRY storage as well!!
Nothing specific other than use the heck out of it and enjoy it!! The 70 four strokes are great engines you should get years of service out of!! Congrats on the purchase
Well dang can’t get pictures to load. Will load one on Monday when I get to a real computer
Planning on getting a box built at xpress specifically for the h22 bay. Instead of mounting it to the floor like in the picture attached I am going to build a stand for it to sit on that elevates it...
Ok I’ve got an idea in the works. It involves a factory storage box with some homemade bracing. Will be an easy install I believe with minimal disruption of what’s already there. I’ll keep everyone...
Youre going to love it!! I went from an xpress xp18 to my h22 last year and the difference in ride in rough water is amazing.
I plan on building it myself as I have an aluminum welder. I have a couple of ideas but was curious if anyone else on here had done one before. Never hurts to compare designs.
Has anyone ever seen or made a front deck extension for an H22 bay? I’ve seen some extensions on the older bass rigs but never on a bay model. I’d like to close in some of the hole between the rod...
Been hunting since october but have squeezed in a couple of good fall crappie trips here in east texas. Definitely agree the action around here has been minimal. Once hunting season is over and it...
Really wanting to try a tempest 21 on my h22b and f200 but have been too busy with work to do it. Please keep us posted on your results
Clarification.... My measurements are pad to center of prop shaft...... I've seen other take different measurements so just an FYI on what I'm seeing on my rig. Water pressure at 3-1/4" PTP on mine...
I have the same exact setup only a 10" plate. 4-1/4" PTP is too low. Mine runs best at about 3 to 3-1/2" PTP. Make sure and keep an eye on water pressure as you start to bring it up. I have a 21"...
5 hours in on a new F200. The past 2 hours have all been above 4K rpms. Just changed oil because it was about an inch high. Kinda sucks because I want to use it not drive around all the time. Dealer...
